Average Rating: n/a
$1,410.76
+ 3 Business Day Shipping $52.00
Specs
| Item | Exhaust Ventilator |
|---|---|
| Type | Hazardous Location, Centrifugal Sidewall Direct Drive |
| Wheel Dia. (In.) | 11 |
| CFM @ 0.000-In. SP | 1180 |
| CFM @ 0.125-In. SP | 1094 |
| CFM @ 0.250-In. SP | 1017 |
| CFM @ 0.375-In. SP | 929 |
| CFM @ 0.500-In. SP | 824 |
| CFM @ 0.625-In. SP | 712 |
| CFM @ 0.750-In. SP | 586 |
| Sones @ 0.125-In. SP @ 5 Ft. | 13.4 |
| Sones @ 0.250-In. SP @ 5 Ft. | 13.0 |
| Motor Voltage | 115/208-230 |
| Phase | 1 |
| Hz | 60 |
| Max. Operating Amps | 4.0/2.0-2.0 |
| Motor HP | 1/4 |
| Max. BHP | 0.20 |
| RPM | 1725 |
| Base Width (In.) | 19 3/4 Dia |
| Base Length (In.) | 19 3/4 Dia |
| Base Height (In.) | 1-3/4 |
| Overall Dia. (In.) | 24-3/8 |
| Overall Height (In.) | 23-3/4 |
| Shaft Dia. Wheel End (In.) | 1/2 |
| Mounting Location | Wall |
| Max. Inlet Temp. (Deg. F) | 300 |
| Housing Material | Spun Aluminum |
| Wheel Material | Aluminum |
| Wheel Type | Backward Incline |
| Speed Controllable | No |
| Agency Compliance | AMCA Sound & Air |
| Includes | NEMA 7 & 9 Disconnect Switch, Mounted & Wired, Hazardous Location Motor That Meets Class I, Groups C & D and Class II, Groups F & G |
| Recommended Damper Size (In.) | 10 x 10 |
| Recommended Damper Stock No. | 4HX73 |
| Weight | 70.000000 |
| SKUs | 6KWJ2 |
Description
Centrifugal Direct-Drive Upblast Exhaust VentilatorsAluminum, backward-inclined wheel 1-piece rolled aluminum windband fully welded to base Motor, drive frame, and blower wheel are isolated from mounting base Motor compartment is isolated from contaminated air NEMA 1 junction box in motor enclosure (Hazardous units have NEMA 7 & 9 disconnect switch) UL and C-UL Listed (Motor only UL Listed for Class I Groups C & D, and Class II Groups F & G for hazardous location units)Note: Speed controllers available for 115V units only. For kitchen application, check with local code authorities for minimum duct velocities. Do not use dampers in any kitchen application. NFPA 96.
Exhaust Ventilator, Hazardous Location, Centrifugal Sidewall Direct Drive, Wheel Dia. 11 In., CFM @ 0.000-In. SP 1180, Sones @ 0.250-In. SP @ 5 Ft. 13.0, Motor Voltage 115/208-230, 1 Phase, 60 Hz, Max. Operating Amps 4.0/2.0-2.0, Motor HP 1/4, Base Width 19 3/4 Dia In., Base Length 19 3/4 Dia In., Mounting Location Wall, Max. Inlet Temp 300 Deg F, Includes NEMA 7 & 9 Disconnect Switch, Mounted & Wired, Hazardous Location Motor That Meets Class I, Groups C & D and Class II, Groups F & G
