Average Rating: n/a
$852.89
+ 3 Business Day Shipping $40.95
Specs
| Item | Centrifugal Upblast Exhaust Ventilator |
|---|---|
| Type | Standard Duty, High Pressure |
| Style | Less Drive Package |
| Wheel Dia. (In.) | 11-1/4 |
| Wheel Type | Backward Incline |
| CFM Range | 700 to 1014 @ 0.500-In SP |
| Max. Inlet Temp. (Deg. F) | 300 |
| Bearing Type | Regreasable Pillow Block |
| Motor HP Range | 1/4 to 1/2 |
| RPM Range | 2045 to 2580 |
| Speed Controllable | No |
| Mounting Location | Roof |
| Base Width (In.) | 22 |
| Base Length (In.) | 22 |
| Base Height (In.) | 1-3/4 |
| Overall Height (In.) | 26-7/8 |
| Overall Dia. (In.) | 24-7/8 |
| Shaft Dia. Wheel End (In.) | 3/4 |
| Shaft Dia. Sheave End (In.) | 3/4 |
| Housing Material | Spun Aluminum |
| Wheel Material | Aluminum |
| Agency Compliance | UL/cUL 705/762 |
| Requires | Roof Curb For New Installation |
| Includes | NEMA 1 Junction Box |
| Adj. 12 3/8"H Roof Curb Stock No. | 2ZV82 |
| Adj. 6 3/8"H Roof Curb Stock No. | 4C670 |
| Recommended 12 In. Fixed Curb Item No. | 2RB76 |
| Recommended 8 In. Fixed Curb Item No. | 4HX39 |
| Fixed UL 762 Kitchen Roof Curb Stock No. | 4HX55 |
| Adj. UL 762 Kitchen Roof Curb Stock No. | 4HX61 |
| Recommended Damper Size (In.) | 15 x 15 |
| Recommended Damper Stock No. | 4HX65 |
| UNSPSC | 40101502 |
| Weight | 53.000000 |
| SKUs | 2RB65 |
Description
Exhaust Ventilator, High Pressure, Centrifugal Upblast, Less Drive Package, Wheel Dia 11 1/4 In, CFM Range 700 to 1014 @ 0.500-In SP, Max Inlet Temp 300 Deg F, Motor HP Range 1/4 to 1/2, Roof Mounting Location, Base Width 22 In, Base Length 22 In, Requires Roof Curb For New Installation, Includes NEMA 1 Junction Box
Restrictions
- WARNING: Do not use a damper in any kitchen installation.
High-Pressure
- Specifically designed for applications that have high static pressure. Great for long vertical duct runs or complex duct runs with several elbows.
- Centrifugal Belt-Drive Upblast Exhaust Ventilators
- Centrifugal Belt-Drive Upblast Exhaust Ventilators
- Designed for use in restaurants, schools, and commercial and industrial applications to exhaust contaminated air from kitchen range hoods up and away from the roof. 1-pc. rolled aluminum windband is fully welded to the base to create a virtually leakproof seal between the ventilator and the mounting surface. Internal steel support braces and a fully rolled windband dramatically increase the rigidity of the ventilator for greater stability during transport and installation. Motor, drive frame, and wheel are isolated from the mounting base by independent neoprene studs no metal-to-metal contact, greatly reducing overall noise. Motor compartment is isolated from the contaminated air stream and is cooled by outside air that is pulled in through an oversized breather tube by the spinning action of the wheel. Motors, sheaves, and belts are packed separately when unassembled ventilator with drive package is ordered.
- UL and C-UL Listed.
- Aluminum, backward-inclined, nonoverloading centrifugal wheel design NEMA 1 junction box located in motor enclosure Max. inlet air temp.: 300 F Air handling quality bearings meet min. L10-100,000 hr. Bearings units without drive package: sealed pillow block up to 16-1/2" wheel dia., regreasable pillow block for 18-1/2" wheel dia. and larger Bearings assembled units: sealed pillow block up to 18-1/2" wheel dia., regreasable pillow block for 21-1/4" wheel dia. and larger UL 762 Listed Restaurant Exhaust Equipment NFPA 96 requires the use of a ventilated roof curb, grease trap, clean-out port, and hinge kit in restaurant applications; for NFPA 96 accessories, see page 4487
