|VOC Content||Less Than45g/L|
|Coverage||590 to 1175 sq. ft./gal.|
|Dry Time||1 hr.|
|Dry Time Recoat||3 hr.|
|Dry Time Tack Free||20 to 40 min.|
|Application Temperature||50 to 90 Degrees F|
|Application Method||Brush, Roll, Spray|
|Green Environmental Attribute||VOC Levels Meet SCAQMD Requirements|
- Rust Reformer chemically transforms rust on metal surfaces into a tough barrier against further corrosion in 1 step. For additional color and protection, top-coat with Rust-Oleum Industrial Enamels. APPLICATION METHOD: Brush, roller, spray gun, aerosol SURFACES: Rusted steel
Average Product Rating: 4.2based on 4 reviews
Works If Properly UsedMonday, July 23, 2012
This rust reformer DOES NOT WORK if you remove all rust before applying it. This product turns surface rust into a hard, black protective coating. No surface rust before application means no protective coating is formed. After proper usage, this product has kept our steel framed windows corrosion free 42 years after it was applied and painted over.
Great CompanyThursday, June 23, 2011
This is a review of Drillspot.com: Ordered on Tuesday, received on Wednesday. Fantastic!
Save Your MoneySunday, October 24, 2010
Recently purchased a cast iron chiminea (butterfly motif) full of rust. Wire brushed, sanded all areas down to bare metal. Upon hardware store clerk's recommendation, I applied 4 coats of Rust Reformer by rag according to directions, and then followed with four coats of Rust-Oleum's high temp flat black. The Reformer goes on milky white and dries flat black. Also purchased a new cover to protect what looked like a very nice finish on the chimenia. Wife was really pleased! Fired it up once and kept it covered when not in use. 3 1/2 weeks later - chimenia is speckled all over with rust. Very DISAPPOINTING!
Went on easy and dried with a nice finish
That it would work!
Rust ReformerTuesday, March 10, 2009
This stuff is great. I'm using it to fix surface rust on a trailer and it really works great! Very easy to brush on and easy clean-up.
Ease of use