Rust Converter, 10.25oz
Average Rating: 1
|Container Size||10.25 oz.|
|Coverage||10 sq. ft.|
|Dry Time||25 min.|
|Application Method||Aerosol Spray|
- Hazardous Material
- Converts rust on contact, leaving a sandable, paintable surface.
- Covers up to 10 sq. ft. Dries in 25 min.
- Primers, Sealers and Rust Treatment
Average Product Rating: 1based on 1 reviews
stay away from this brand!Monday, April 29, 2013
I have used rust conversion primers since the 1980's and until now every brand I used worked as it should. This time it was utter frustration. 1. It sprayed just awful. Very heavy and spitting. Impossible to apply a light coat. 2. It did not convert the rust scale all the way through. 3. It did not turn black uniformly on the bare metal. Rust conversion primers typically will cure to a nice satin black sheen. 4. It is not sandible. Could not feather the edges. 5. Absolutely terrible adhesion to the metal. After over-coating with primer for surface prep, I masked and applied top coat. When I removed the tape (the best 3M sells) the primer and rust conversion primer came off with the tape down to bare metal. 6. Reacts to primer and topcoat solvents creating a visible scalloped feather edge. I had to sand the pieces back down to bare metal and start over. I had purchased two cans and both acted exactly as I described. Any other brand should be okay.
nothing at all