Manifold, TankACM100-150 35597
Average Rating: 4
|Max. Flow (CFM)||20|
|Tank Mount (In.)||1/2 (M)NPT|
|Factory Set Pressure (PSI)||150|
|Pressure Switch Mount (In.)||1/4 (M)NPT|
|Filler Valve||Tire Type|
|Sealing Temp. (Deg. F)||-65 to 250|
|Temp. Range (F)||-40 to 180|
|Width (In.)||3 1/2|
|Depth (In.)||3 1/2|
|Features||Safety Valve, Outlet Valve, Tank Mount Fitting Air Gauge Fitting and Pressure Switch Fitting|
- 6X271 features all-in-one outlet fitting for safety valve, outlet valve, tank mounting, and air gauge and pressure switch mountings. 6X272 is similar but has tire-type filler valve in place of pressure switch fitting. Factory set for 150 psi, temp. range: -40 to 180 F. Sealing temp. range: -65 to 250 F.
Average Product Rating: 4based on 1 reviews
Does what it's supposed to doTuesday, August 23, 2011
1/2" M NPT at bottom (threads into tank). Gauge fitting (opposite of safety valve) and outlet fitting (opposite of red knob) are 1/4" F NPT (knob operates a shut-off valve for the outlet). Pressure switch fitting (top) is 1/4" M NPT. Mine leaked around the safety valve, but it's a removeable part so I just pulled it off, applied teflon tape, and reinstalled. I also used teflon on the tank fitting because I didn't like how far up the threads the pre-applied sealant was. Just what I needed for fixing up an old compressor off Craigslist. -1 for a built-in (easily fixed) leak.
Price, apparently made in USA.
Pre-applied sealant isn't so great