Average Rating: n/a
$1,114.74 + 3 Business Day Shipping $45.50
Specs
| Item | Compressor/Vacuum Pump |
|---|---|
| Type | Rotary Vane |
| HP | 1 |
| Voltage | 230/460 |
| Phase | 3 |
| Full Load Amps | 3.0/1.5 |
| Hz | 50/60 |
| (F)NPT Inlet (In.) | 3/8 |
| (F)NPT Outlet (In.) | 3/8 |
| Free Air CFM @ 0 PSI | 13.50 |
| Free Air CFM @ 5 PSI | 11.9 |
| Free Air CFM @ 10 PSI | 10.00 |
| Free Air CFM @ 0 Vacuum (in Hg) | 13.20 |
| Free Air CFM @ 5 Vac (in Hg) | 10 |
| Free Air CFM @ 10 Vac (in Hg) | 8.00 |
| Free Air CFM @ 15 Vac (in Hg) | 6.00 |
| Free Air CFM @ 20 Vac (in Hg) | 2.70 |
| Free Air CFM @ 25 Vac (in Hg) | 0.00 |
| Length (In.) | 16-1/8 |
| Width (In.) | 6-1/2 |
| Height (In.) | 8-7/8 |
| Housing | Cast Iron |
| Bearings | Sealed |
| Design | Oil-less |
| Features | Self-adjusting, Self-lubricating Vanes For Maximum Efficiency |
| Overload Protection | Thermal |
| Agency Compliance | CSA |
| Includes | Integral Mufflers and Filters |
| UNSPSC | 40151502 |
| Weight | 60.000000 |
| SKUs | 4TF21 |
Description
Vacuum Pump, Power Rating 1 HP, Voltage Rating 230/460 Volts, Current Rating 3.0/1.5 Amps, NPT Inlet (F) 3/8 Inches, NPT Outlet (F) 3/8 Inches, Phase Three, Free Air Flow @ 10 PSI 10 CFM, Free Air Flow @ 10 Inches Vacuum 8 CFM, Free Air Flow @ 15 Inches Vacuum 6 CFM, Free Air Flow @ 20 Inches Vacuum 2.7 CFM, Free Air Flow @ 5 PSI 11.9 CFM, Free Air Flow @ 5 Inches Vacuum 10 CFM
Restrictions
- Note: When used for pond aeration, include the appropriate check valve in discharge line to prevent water from entering pump in case of power failure.
Rotary Vane Compressors and Vacuum Pumps
- For general continuous-duty vacuum and low-pressure applications. 5Z667 has a 10-ft. power cord with plug and toggle switch. 3KYY2, 3KYY4, 4F740, 4F741, 4F742, 4TF21, and 4TF22 have integral mufflers and filters, as well as international multivoltage, dual-frequency motors. All units are single phase except for 2CJG8 and 4TF21; single-phase units have thermal overload protection. 4Z470 and 4Z469 include coupling and coupling guard. Mount directly to 56C frame motors. Models with motors are not CSA Certified (7Z778, 7Z779, 7Z780, 7Z781, 7Z782, 7Z783).
- Oilless design Permanently lubricated and sealed bearings Self-adjusting, self-lubricating vanes
