Shaft Support Block, 0.500 In BoreFSB8 37004
Average Rating: n/a
|Item||Shaft Support Block|
|Bore Dia. (In.)||0.500|
|Mounting Bolt (In.)||#8|
|Mounting Hole (In.)||0.180|
|Shaft Dia. (In.)||0.500|
- Note: Not for use with open-type Ball Bushing bearings.
- Eliminate the need for adapter brackets and bolts to maintain shaft position. Use blocks as end or intermittent support, especially where loads are light and deflection is not problematic. Alignment is virtually automatic due to the bore being parallel to the center line of the shaft. Flanged blocks feature a convenient slot and adjusting screw, allowing shafts to be clamped and secured during installation.