Average Rating: n/a
$29.61 + 3 Business Day Shipping $6.51
Specs
| Item | Motion Control Coupling |
|---|---|
| Style | Single Beam Set Screw |
| Bore Dia. | 1/8 x 1/8" |
| Min. Bore (In.) | 0.118 |
| Min. Bore (mm) | 3.00 |
| Max. Bore (In.) | 0.118 |
| Max. Bore (mm) | 3.00 |
| Outside Dia. (In.) | 0.512 |
| Outside Dia. (mm) | 13 |
| Hub Dia. | 0.512" |
| Overall Length (In.) | 0.512 |
| Overall Length (mm) | 13 |
| Length through Bore (In.) | 0.118 |
| Length through Bore (mm) | 3.00 |
| Screw Type | Set Screw |
| Screw Size (In.) | 4-40 |
| Screw Size (mm) | M2.5 |
| Setscrew Location | 0.07 |
| Torque (In.-Lbs.) | 1.8 |
| Max. RPM | 10,000 |
| Max. Angular Misalignment | 5 Degrees |
| Max. Parallel Misalignment (In.) | 0.005 |
| Max. Axial Misalignment (In.) | +/-.010 |
| Max. Temp. Range (F) | 200 |
| Material | Anodized Aluminum |
| Finish | Anodized Aluminum |
| Size | ES050 |
| UNSPSC | 31163002 |
| Weight | 0.020000 |
| SKUs | 1CYH8 |
Description
Motion Control Coupling, Single Beam Set Screw Style, Bore Dia 1/8 x 1/8 In, Min Bore 0.118 In, Max Bore 0.118 In, Outside Dia 0.512 In, Hub Dia 0.512 In, Overall Length 0.512 In, Length through Bore 0.118 In, Set Screw, Screw Size 4-40 In, 0.07, Torque Nominal 1.80 In-Lbs, 10, 000 Max RPM, Max Temp 200 F, Anodized Aluminum Material, Anodized Aluminum Finish
Motion Control Shaft Couplings
- Single-Beam, ES and EC Series
- Beam-flexible couplings have a spiral slot cut lengthwise to form a springlike center section (called a helical coil or beam). The design is well-suited for small-shaft applications. Couplings operate clockwise or counterclockwise and have a very high tolerance to heat, chemicals, and corrosion. Anodized aluminum finish.
- Nonlubricated couplings for applications where 2 shafts must move at the same speed, to the same location. Maintain constant velocity and provide protection from misalignment and corrosive elements. Suitable for light-duty applications with torque ratings less than 50 in.-lb., low inertia, and the capability of cyclic (repeated stop/stop/reverse) activity. Use in applications with a fractional electric motor driver, such as shaft encoders, medical equipment, servo devices, robots, linear and ball screw actuators, step motors, light-duty pumps and metering devices, plotters, positioning tables, computers, and radar.
- Max. rpm: 10,000 Max. temp: 200 F (93 C)
- Zero backlash Transmit low reactionary loads on bearings
More Products
Ruland ManufacturingCoupling, 4 Beam Clamp, Bore 1/4 x 1/4 InPCR12-4-4-A462461$48.41 + $6.53 Shipping
Ruland ManufacturingCoupling, Bellows Clamp, Bore 7/8x5/8 InBC32-14-10-A463577$192.52 + $6.85 Shipping