Splice Kit, Motor Lead5300 42706
Average Rating: n/a
|Item||Motor Lead Splice Kit|
|Wire Range (AWG)||16 to 12|
|Max. Cable Dia. (In.)||0.12 to 0.21|
|Bolt Length (In.)||3/8|
|Standard Length (In.)||2.10|
|Material of Construction||EPDM Rubber|
|Temp. Range||90 Degrees C|
|Includes||3 Lug Covers, Tape, Sealing Strips, Silicone Grease Lubricant, Instruction Sheet|
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer.
- Make a uniform seal without torches or special tools. Pigtail kits make lugged motor lead connections to incoming feeder cables. Preformed, slip-on rubber boots and mastic sealing strips fit a wide range of cable sizes. Use copper 1-hole lugs only (not included). 90 C continuous use temperature rating.
- Insulating Kits for Motor Connections and Mechanical Connectors
- Kits provide physical protection for connections of any size, insulating them against moisture in above-ground or direct-burial applications.