Average Rating: n/a
$1,103.29 + 3 Business Day Shipping $29.90
Specs
| Item | Pressure Plunger Pump |
|---|---|
| Type | Belt-Drive |
| Flow Capacity (GPM) | 8.0 |
| RPM | 1750 |
| HP Required @ 500 PSI | 2.7 |
| HP Required @ 1000 PSI | 5.5 |
| HP Required @ 1500 PSI | 8.2 |
| HP Required @ 2000 PSI | 11.0 |
| HP Required @ 2500 PSI | 13.7 |
| HP Required @ 3000 PSI | 16.5 |
| HP Required @ 3500 PSI | 19.2 |
| Shaft Dia. | 24 mm |
| Inlet Port (In.) | 3/4 F |
| Discharge Port (In.) | 3/8 F |
| Length (In.) | 12.2 |
| Width (In.) | 9.7 |
| Height (In.) | 5.8 |
| Seal | Cotton Duct, Buna N Chevron and Lip Seal Packing |
| Bearings | Premium Tapered Roller |
| Max. Fluid Temp. (F) | 140 |
| Max. Inlet Pressure (PSI) | 100 |
| Driver Type | Electric Motor or Gasoline Engine |
| Connecting Rod | Aluminum |
| Crankcase | Precision Die Cast |
| Discharge Pressure (PSI) | 3500 |
| Manifold Material | Forged Brass |
| Plunger | Ceramic |
| Lubrication | Splash |
| Crankshaft | Hardened Steel |
| Pump Head | Forged Brass |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| UNSPSC | 40151510 |
| Weight | 36.000000 |
| SKUs | 1MCY2 |
Description
Pressure Washer Pump, Plunger, Shaft Dia. 24 mm, Inlet Port (In.) 3/4 F, Discharge Port (In.) 3/8 F, Seal Cotton Duct, Buna N Chevron and Lip Seal Packing, Premium Tapered Roller Bearings, Max. Fluid Temp. 140 F, Max. Inlet Pressure 100 PSI, Driver Type Pulley/Coupler, Aluminum Connecting Rod, Precision Die Cast Crankcase, Discharge Pressure 3500 PSI, Manifold Material Forged Brass, Ceramic Plunger, Splash Lubrication, Hardened Steel Crankshaft, Forged Brass Pump Head
High-Pressure Triplex Pumps
- Suitable for high-pressure water applications, including car wash, pressure wash, sewer jetting, and cooling misting. Forged brass manifold has high-grade head bolts for added protection and strength. Feature a precision die-cast crankcase and stainless steel valves, plus oversize bearings and connecting rods for heavy load disbursement. 1MDB2 and 1MDB3 have 316L stainless steel manifold and Viton seals. Direct-Mount, Electric Motor Pumps have standard C-face mounting. Belt-Drive Pump accessories are available: See page 157 for 24mm and 35mm split taper bushings and sheaves. See page 1848 for pressure washer accessories. For new installations a mounting kit rail is available from your local branch or DrillSpot.com .
- Max. fluid temp: 140 F Concentric ceramic plungers Continuously lubricated seals
