Average Rating: n/a
$2,273.17 + This item ships directly from the manufacturer within 11 business days. Please allow additional time for delivery.
Specs
| Item | Pressure Plunger Pump |
|---|---|
| Type | Belt-Drive |
| Flow Capacity (GPM) | 4.2 |
| RPM | 1750 |
| HP Required @ 500 PSI | 1.4 |
| HP Required @ 1000 PSI | 2.9 |
| HP Required @ 1500 PSI | 4.3 |
| Shaft Dia. | 24 mm |
| Inlet Port (In.) | 1/2 F |
| Discharge Port (In.) | 3/8 F |
| Length (In.) | 9.9 |
| Width (In.) | 7.7 |
| Height (In.) | 4.9 |
| Seal | Cotton Duct, Buna N Chevron and Lip Seal Packing |
| Bearings | Premium Tapered Roller |
| Max. Fluid Temp. (F) | 140 |
| Max. Inlet Pressure (PSI) | 100 |
| Driver Type | Electric Motor or Gasoline Engine |
| Connecting Rod | Bronze |
| Crankcase | Precision Die Cast |
| Discharge Pressure (PSI) | 1500 |
| Manifold Material | 316 Stainless Steel |
| Plunger | Ceramic |
| Lubrication | Splash |
| Crankshaft | Hardened Steel |
| Pump Head | 316 Stainless Steel |
| Application | High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting |
| UNSPSC | 40151510 |
| Weight | 23.850000 |
| SKUs | 1MDB3 |
Description
Pressure Washer Pump, Plunger, Shaft Dia. 24 mm, Inlet Port (In.) 1/2 F, Discharge Port (In.) 3/8 F, Seal Cotton Duct, Buna N Chevron and Lip Seal Packing, Premium Tapered Roller Bearings, Max. Fluid Temp. 140 F, Max. Inlet Pressure 100 PSI, Driver Type Pulley/Coupler, Bronze Connecting Rod, Precision Die Cast Crankcase, Discharge Pressure 1500 PSI, Manifold Material 316L SS, Ceramic Plunger, Splash Lubrication, Hardened Steel Crankshaft, 316L Stainless Steel Pump Head
High-Pressure Triplex Pumps
- Suitable for high-pressure water applications, including car wash, pressure wash, sewer jetting, and cooling misting. Forged brass manifold has high-grade head bolts for added protection and strength. Feature a precision die-cast crankcase and stainless steel valves, plus oversize bearings and connecting rods for heavy load disbursement. 1MDB2 and 1MDB3 have 316L stainless steel manifold and Viton seals. Direct-Mount, Electric Motor Pumps have standard C-face mounting. Belt-Drive Pump accessories are available: See page 157 for 24mm and 35mm split taper bushings and sheaves. See page 1848 for pressure washer accessories. For new installations a mounting kit rail is available from your local branch or DrillSpot.com .
- Max. fluid temp: 140 F Concentric ceramic plungers Continuously lubricated seals
