Wire Cable Clip, Pk25
Average Rating: 2
|Item||Kwik-Klips Cable Clip|
|Holding Capacity (In.)||1/4|
|Slot Width (In.)||0.25|
|Mounting Method||Adhesive Backed|
|Temp. Range (F)||-140 to 185|
|Material of Construction||Gray PVC|
|Adhesive Thickness (In.)||1/16|
- Cable tie mounting pads accept cable ties up to 50 lb. tensile strength (miniature through standard).
- UL Recognized. Meet UL 94V-2 requirements.
Average Product Rating: 2based on 1 reviews
Adhesive not sufficiently adhesiveSaturday, May 28, 2011
They basically do what they should do, with one glaring exception: The adhesive is only temporary. If the cable curves near the clip, so it is pulling the clip away from the wall, the adhesive fails to resist and the clip falls off the wall. This implies that you need to use some additional method. You could provide your own high-quality glue, drill a hole and screw it into the substrate, etc. That makes the product much less convenient than if its adhesive really worked.