PSC Blower, 115 Volt1TDN7 433877
Average Rating: 4.8
|Wheel Dia. (In.)||3|
|Wheel Width (In.)||1-7/8|
|CFM @ 0.000-In. SP||50|
|CFM @ 0.100-In. SP||48|
|CFM @ 0.200-In. SP||44|
|CFM @ 0.300-In. SP||39|
|CFM @ 0.400-In. SP||32|
|CFM @ 0.500-In. SP||18|
|Full Load Amps||0.23|
|Motor Type||Permanent Split Capacitor|
|Motor Insulation||Class B|
|Lead Length (In.)||13|
|Ambient Temp. (Deg. F)||104|
|Max. Inlet Temp. (Deg. F)||104|
|Inlet Dia. (In.)||2-3/8|
|Outlet Dia. (In.)||2-1/8|
|Overall Height (In.)||5-13/16|
|Overall Width (In.)||5-1/8|
|Overall Depth (In.)||6-7/16|
|Wheel Type||Forward Curve|
|Housing Finish||Gray Enamel|
|Housing Material||Rolled Steel|
|Agency Compliance||UL Recognized US and Canada (E47479), CE|
|Includes||Discharge Mounting Flange and Inlet Cover|
- Note: Not for use with speed controllers.
- Dynamically balanced blowers provide smooth and quiet operation. Noise and vibration are held to a minimum to maintain CFM at higher static pressures. Motors have cast-aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.
- UL and C-UL Recognized (E47479).
- Direct replacements for many OEM blowers with same physical footprint All-position mounting Min./max. operating temp. range: -20 to 104 F Max. inlet and ambient temp.: 104 F Motor enclosure: open
Average Product Rating: 4.8based on 6 reviews
Dayton MotorTuesday, January 17, 2012
The old motor was outdated and I was worried about getting the proper motor but this part number crossed over to that motor and it fit and works great.
ExcellentTuesday, October 18, 2011
Just what I needed at a reasonable price and I received it faster than promised!
Great Item at a Great Price!Tuesday, October 18, 2011
It is a handy fan to keep on spare. Rugged and reliable.
Small, compact and easy to install
Great Fast ServiceWednesday, October 12, 2011
Product was exactly what I ordered. Very pleased.
Dayton 1TDN7 PSC BlowerMonday, March 28, 2011
Replaced a sleeve bearing blower with this ball bearing unit. This one runs much cooler and uses about 1/2 the power of my old one.
Works Well, QuietSaturday, November 06, 2010
I bought this for a home built fireplace heat exchanger. It is pretty quiet and has pretty much the perfect CFM. It would have been better if it came with a cord and switch otherwise, it is pretty much just what I needed. This one was not made for variable speed but then again, the CFM is pretty much perfect for my application. You can adjust the airflow by adjusting the intake cover.
Quiet. Correct airflow
Switch, Cord, Variable speed