Average Rating: 4
$80.04 + 3 Business Day Shipping $9.00
Specs
| Item | PSC Blower |
|---|---|
| Wheel Dia. (In.) | 3 |
| Wheel Width (In.) | 1-7/8 |
| CFM @ 0.000-In. SP | 89 |
| CFM @ 0.100-In. SP | 85 |
| CFM @ 0.200-In. SP | 78 |
| CFM @ 0.300-In. SP | 74 |
| CFM @ 0.400-In. SP | 66 |
| CFM @ 0.500-In. SP | 58 |
| Voltage | 115 |
| Hz | 50/60 |
| Phase | 1 |
| Full Load Amps | 0.31 |
| RPM | 3010 |
| Bearing Type | Ball |
| Motor Type | Permanent Split Capacitor |
| Motor Enclosure | Open |
| Motor Insulation | Class B |
| Thermal Protection | Auto |
| Lead Length (In.) | 13 |
| Conduit Box | Yes |
| Ambient Temp. (Deg. F) | 104 |
| Max. Inlet Temp. (Deg. F) | 104 |
| Inlet Dia. (In.) | 2-5/8 |
| Outlet Height (In.) | 2-3/16 |
| Outlet Width (In.) | 2-11/16 |
| Overall Height (In.) | 5-3/4 |
| Overall Width (In.) | 5-3/8 |
| Overall Depth (In.) | 5-3/8 |
| Wheel Type | Forward Curve |
| Drive Type | Direct |
| Mounting | All Position |
| Housing Finish | Gray Enamel |
| Housing Material | Rolled Steel |
| Agency Compliance | UL Recognized US and Canada (E47479), CE |
| Replaces | 4C004 |
| Includes | Discharge Mounting Flange |
| UNSPSC | 40101601 |
| Weight | 3.850000 |
| SKUs | 1TDP1 |
Description
PSC Blower, Forward Curve, Direct Drive, Wheel Dia 3 In, CFM @ 0.000-In SP 89, Voltage 115, 60 Hz, Single Phase, Full Load Amps 0.31, RPM 3010, Max Inlet Temp 104 Deg F, Overall Height 5 3/4 In, Overall Width 5 3/8 In, Overall Depth 5 3/8 In, Includes Discharge Mounting Flange
Restrictions
- Note: Not for use with speed controllers.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
30 to 312 CFM PSC, Shaded Pole, DC, and 3-Phase Blowers, Rectangular Outlet
- Dynamically balanced blowers provide smooth and quiet operation. Noise and vibration are held to a minimum to maintain CFM at higher static pressures. Motors have cast-aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.
- UL and C-UL Recognized (E47479), except 2C646 is not UL or C-UL Recognized, and 2C647 is UL Recognized (E22286) and CSA Certified (LR12645).
- Direct replacements for many OEM blowers with same physical footprint All-position mounting Min./max. operating temp. range: -20 to 104 F Max. inlet and ambient temp.: 104 F Motor enclosure: open
Customer Reviews
Henry replacment blower
Monday, November 22, 2010this is a good replacment for the blower used in most Henry desk top amps you may need to drill some new mounting holes or move some thing on the rear panel to make this blower fit. need help ? www.amplady.com for free tech help
Price
could have been balanced better use a 50 watt 75 ohm resistor to drop speed some to stop vibrations
