PSC Blower, 115 Volt1TDP8 433887
Average Rating: 5
|Wheel Dia. (In.)||2-15/16|
|Wheel Width (In.)||1-7/8|
|CFM @ 0.000-In. SP||184|
|CFM @ 0.100-In. SP||178|
|CFM @ 0.200-In. SP||170|
|CFM @ 0.300-In. SP||158|
|CFM @ 0.400-In. SP||140|
|CFM @ 0.500-In. SP||120|
|Full Load Amps||0.72|
|Motor Type||Permanent Split Capacitor|
|Motor Insulation||Class B|
|Lead Length (In.)||13|
|Ambient Temp. (Deg. F)||104|
|Max. Inlet Temp. (Deg. F)||104|
|Inlet Dia. (In.)||2-5/8|
|Outlet Height (In.)||2-1/8|
|Outlet Width (In.)||2-11/16|
|Overall Height (In.)||5-3/4|
|Overall Width (In.)||8-7/16|
|Overall Depth (In.)||5-3/8|
|Wheel Type||Forward Curve|
|Housing Finish||Gray Enamel|
|Housing Material||Rolled Steel|
|Agency Compliance||UL Recognized US and Canada (E47479), CE|
|Includes||Discharge Mounting Flange|
- Note: Not for use with speed controllers.
- Dynamically balanced blowers provide smooth and quiet operation. Noise and vibration are held to a minimum to maintain CFM at higher static pressures. Motors have cast-aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life.
- UL and C-UL Recognized (E47479), except 2C646 is not UL or C-UL Recognized, and 2C647 is UL Recognized (E22286) and CSA Certified (LR12645).
- Direct replacements for many OEM blowers with same physical footprint All-position mounting Min./max. operating temp. range: -20 to 104 F Max. inlet and ambient temp.: 104 F Motor enclosure: open
Average Product Rating: 5based on 3 reviews
It worksThursday, January 06, 2011
Wish you could buy motor only.
Dayton BlowerThursday, December 23, 2010
Looked all over for this blower and found it cheapest at Drillspot.com. Had it fast to get my woodstove going again.
PerfectTuesday, December 14, 2010
Exact motor I needed. Cheapest price.