Load Center, 60 AQO403L60NS 43460
Average Rating: 3
|RMS Symmetrical Amp Rating||65000|
|Circuit Breaker Type||QO|
|Number of Spaces||3|
|Max. No. of 1 Pole Breakers||3|
|Max. No. of Tandem Breakers||0|
|Copper (AWG/kcmil)||10 to 6|
|Bus Material||Copper Plated|
|Material of Construction||Shielded Copper|
|Cover Type||Low Profile with Automatic Flush Adjustment|
|Ground Bar Kit||5B718|
|Rotated For||Top or Bottom Feed|
|Federal Specification||W-P-115c as Type 1 Class 2|
- Can be rotated for top or bottom feed. Required low-profile covers with automatic flush adjustment are included with some models; see table.
- 120/240VAC Fed Spec W-P-115C as Type 1 Class 2 Use only QO circuit breakers (see page 276) Accessories available; contact your local branch
Average Product Rating: 3based on 1 reviews
Below par Square DTuesday, April 26, 2011
This inferior SD is fabricated in Mexico. It is sloppy, the ground screw hole was not threaded, the faceplate holes did not match the box threads and the faceplate is so mis-stamped that you have to bang the breaker to get it to fit into the cutout it was intended to mate with. Buy if there is no other viable choice. On the plus side, the breaker does fit the inside of the box well, the size is perfect for devices needing three phase protection near the device, it was not astronomically over-priced as most SD products are and after 30 minutes of tweaking and tapping, it performed nicely.
It ultimately worked for its intended purposed
Make it in the USA by skilled labor.