Washdown Motor, 3-Phase, 1/2 HP, 1725 Nameplate RPM, Voltage 208-230/460, Phase 3, 56C Frame, Totally Enclosed Nonventilated, Full Load Amps 2.0-1.8/0.9, 60 Hz, Face Mounting, Thermal Protection None, F Insulation Class, Service Factor 1.15, Ball Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Rotation, Overall Length 10-1/16 In., Shaft Dia. 5/8 In., Shaft Length 1-7/8 In., Body Dia. 6-1/2 In., Length Less Shaft 8-3/16 In., Continuous Duty, Frame Material Epoxy Coated Steel
3-Phase Painted Washdown Motors- Built to comply with NEMA standard MG1-1.26.6 for washdown motors. Copper windings are cured in protective polyester compound. 303 stainless steel shaft. V-ring rotating seal. Double-sealed, oversize bearings and spring-loaded contact seals in each endshield are lubricated with moisture-resistant grease. Conduit boxes have drains to shed excess moisture. Bearing cavities are packed to help keep moisture out. White epoxy finish provides superior resistance to caustic cleaning solutions. For high humidity/wet environments and areas where motor is occasionally exposed to high-pressure washdowns. Feather-picker motor 5XAT6 has a top-mounted conduit box.
- All models are UL Recognized, CSA Certified, and USDA Approved.
- Insulation: Class F Max. ambient: 40 C Thermal protection: none Bearings: ball Rotation: CW/CCW Inverter rated