Average Rating: n/a
$2,763.52
+ This item ships directly from the manufacturer within 10 business days. Please allow additional time for delivery.
Specs
| Item | Pump |
|---|---|
| Type | Centrifugal Coolant |
| HP | 4 |
| Phase | 3 |
| Amps | 12.1/6.1 |
| Voltage | 230/460 |
| Number of Stages | 16 |
| Length (In.) | 7-1/2 |
| Width (In.) | 7-1/2 |
| Height (In.) | 32-1/4 |
| Discharge Port (In.) | 1 |
| Bolt Circle Dia. (In.) | 8-1/2 |
| Motor Type | TEFC |
| GPM @ 25 PSI | 28 |
| GPM @ 50 PSI | 27 |
| GPM @ 100 PSI | 24 |
| GPM @ 150 PSI | 20 |
| GPM @ 200 PSI | 12 |
| GPM @ 250 PSI | 1 |
| Max. Pressure (PSI) | 250 |
| GPM of Oil 500 SSU @ 3 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 6 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 9 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 12 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 15 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 18 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 21 Ft. of Head | 22 |
| GPM of Oil 500 SSU @ 24 Ft. of Head | 22 |
| Max. Immersion Depth (In.) | 15 |
| RPM | 3450 |
| Impeller Material | 304 Stainless Steel |
| Body Material | Cast Iron |
| Max. Recommended Viscosity | 500 SSU |
| Max. Suction Lift (Ft.) | 3 |
| Max. Temp. | 180 F |
| Shaft Material | 304 Stainless Steel |
| Shaft Seal | Silicon Carbide |
| Elastomer | Viton |
| Application | Machine Tool Coolants, Light Oils |
| For Use With | Non-Flammable Liquids Compatible with Pump Component Materials |
| Includes | By-Pass Kit |
| UNSPSC | 40151533 |
| Weight | 107.000000 |
| SKUs | 1XLN3 |
Description
Pump, Centrifugal Coolant, 4 HP, 3 Phase, Voltage 230/460, 12.1/6.1 Amps, Number of Stages 16, Discharge Port 1 In., Bolt Circle Dia. 8 1/2 In., Motor Type TEFC, GPH of Water @ 1 Ft. of Head 1680, GPH of Water @ 5 Ft. of Head 1680, GPH of Water @ 10 Ft. of Head 1680, Shut-Off 580 Ft., GPM of Oil 500 SSU @ 3 Ft. of Head 22, GPM of Oil 500 SSU @ 15 Ft. of Head 22, Application Machine Tool Coolants, Light Oils
Restrictions
- Note: Use only with nonflammable liquids compatible with pump component materials and in nonflammable/nonexplosive atmospheres.
High-Pressure Machine Coolant Pumps
- Pumps deliver a high-rate, pulsation-free flow of light oil or coolant; protect tooling from thermal shock in through-the-tool applications or anywhere greatly increased feed rates are required. Cast-iron intake and motor mounting frame and tungsten carbide seal with Viton elastomers. Includes bypass kit. For use with indexable carbide-insert end mills, boring bars, reamers, and solid end mills.
- Max. temp.: 180 F Max. viscosity: 500 SSU Max. discharge pressure: 326 psi 3450 rpm, 3-phase TEFC motor Stainless steel housing, impeller, and shaft