Average Rating: n/a
$38.15 + 3 Business Day Shipping $6.63
Specs
| Bore Dia. (In.) | 0.750 |
|---|---|
| Overall Width (In.) | 0.750 |
| Overall Length (In.) | 2.500 |
| Overall Height (In.) | 2.055 |
| Body Width (In.) | 1.000 |
| Flange Thickness (In.) | 0.313 |
| Mounting Surface to Shaft Center (In.) | 1.250 |
| Mounting Hole Dia. (In.) | 7/32 |
| Bolt Size | #10 |
| Dynamic Load Capacity (Lb.) | 3810 |
| Static Load Capacity (Lb.) | 3810 |
| Accelerated Speed | 14 Feet/Second |
| Steady State Speed | 5 Feet/Second |
| Temp. Range (F) | 0 - 400 |
| Liner | Frelon(TM) Gold |
| Lubrication | No Lubrication System |
| UNSPSC | 23153030 |
| Weight | 0.200000 |
| SKUs | 2CNU9 |
Description
Shaft Support Block, Bore Dia 0.750 In, Overall Width 0.750 In, Overall Length 2.500 In, Overall Height 2.055 In, Body Width 1.000 In, Flange Thickness 0.313 In, Mounting Surface to Shaft Center 1.250 In, Mounting Hole Dia 7/32 In, #10 Bolt Size, Dynamic Load Capacity 3810 Lb, Static Load Capacity 3810 Lb, For Use With Support and Feather Rails
Restrictions
- Note: Not for use with open-type Ball Bushing bearings.
Shaft Support Blocks
- Eliminate the need for adapter brackets and bolts to maintain shaft position. Use blocks as end or intermittent support, especially where loads are light and deflection is not problematic. Alignment is virtually automatic due to the bore being parallel to the center line of the shaft. Flanged blocks feature a convenient slot and adjusting screw, allowing shafts to be clamped and secured during installation.
