Average Rating: n/a
$888.03 + 3 Business Day Shipping $63.70
Specs
| Item | Pumping System |
|---|---|
| Type | Pump/Tank |
| HP | 1/8 |
| Phase | 3 |
| Amps | 0.32/0.19 |
| Voltage | 230/460 |
| Length (In.) | 44 |
| Width (In.) | 16 |
| Height (In.) | 15-1/2 |
| Discharge Port (In.) | 3/8 |
| Bolt Circle Dia. (In.) | 5 |
| Inlet/Outlet (In.) | 3/8 |
| RPM | 3450 |
| Motor Type | TENV |
| Motor Enclosure | TENV |
| GPH of Water @ 1 Ft. of Head | 720 |
| GPH of Water @ 2 Ft. of Head | 660 |
| GPH of Water @ 3 Ft. of Head | 600 |
| GPH of Water @ 5 Ft. of Head | 540 |
| GPH of Water @ 8 Ft. of Head | 420 |
| GPH of Water @ 9 Ft. of Head | 360 |
| GPH of Water @ 10 Ft. of Head | 300 |
| GPM of Water @ 3 Ft. of Head | 10 |
| GPM of Water @ 5 Ft. of Head | 9 |
| GPM of Water @ 6 Ft. of Head | 8 |
| GPM of Water @ 7 Ft. of Head Low | 7 |
| GPM of Water @ 9 Ft. of Head | 6 |
| Shut-Off (Ft.) | 13 |
| Tank (Gal.) | 21 |
| GPM of Oil 500 SSU @ 3 Ft. of Head | 8 |
| GPM of Oil 500 SSU @ 6 Ft. of Head | 5.5 |
| GPM of Oil 500 SSU @ 9 Ft. of Head | 4.8 |
| GPM of Oil 500 SSU @ 12 Ft. of Head | 1 |
| Min. Immersion Depth (In.) | 3 |
| Max. Immersion Depth (In.) | 6 |
| Nominal Tank Depth (In.) | 8 |
| Impeller Material | Plastic |
| Body Material | Cast Iron |
| Max. Recommended Viscosity | 500 SSU |
| Max. Temp. | 180 Degrees F |
| Shaft Material | Steel |
| Application | Machine Tool Coolants, Light Oils |
| For Use With | Non-Flammable Liquids Compatible with Pump Component Materials |
| Includes | Chip Bowl |
| UNSPSC | 40151504 |
| Weight | 88.000000 |
| SKUs | 1XLL3 |
Description
Pumping System, Pump/Tank, HP 1/8, Phase 3, Amps 0.32/0.19, Voltage 230/460, Length 44 In., Width 16 In., Height 15 1/2 In., Inlet/Outlet 3/8 In., RPM 3450, Motor Enclosure TENV, GPM of Water @ 3 Ft. of Head 10, GPM of Water @ 5 Ft. of Head 9, GPM of Water @ 9 Ft. of Head 6, 13, Tank 21 Gal., Max. Immersion Depth 6 In., Max. Recommended Viscosity 500 SSU, Max. Temp. 180 DegreeF
Machine Coolant Tanks and Pump/Tank Combinations
- For use on small drill presses, tool grinders, tapping machines, cut-off saws, and small lathes. For machine coolant, see page 3838.
- Coolant Recirculating Pump/Tank Systems
- Include pump, standard mesh screens or chip basket. Models with tanks that are 10 gal. and larger have internal baffles with MIG-welded seams. TENV motors (except 1XLK8 has a TEFC motor). 1XLK8 includes flexible metal hose, 4-ft. neoprene hose, flow control valve, and cord with plug.
- Max. temp.: 180 F Steel shaft; cast-iron housing Durable powder-coated metal construction
