Washdown Motor, Capacitor-Start, 1-1/2 HP, 1740 Nameplate RPM, Voltage 115/208-230, Phase 1, 56HC Frame, Totally Enclosed Fan-Cooled, Full Load Amps 14.8/7.8-7.4, 60 Hz, Face/Base Mounting, Thermal Protection None, F Insulation Class, Service Factor 1.15, Ball Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Rotation, Overall Length 11-3/4 In., Shaft Dia. 5/8 In., Shaft Length 1-7/8 In., Body Dia. 6-1/2 In., Length Less Shaft 9-7/8 In., Continuous Duty, Frame Material Epoxy Coated Steel
1-Phase Washdown Motors
- Built to comply with NEMA standard MG1-1.26.6 for washdown motors. 303 stainless steel shaft. V-ring rotating seal. Double-sealed, oversize bearings and spring-loaded contact seals in each endshield are lubricated with moisture-resistant grease. Conduit boxes have drains to shed excess moisture. White epoxy finish for superior resistance to caustic cleaning solutions. For high humidity/wet environments and areas where motor is occasionally exposed to high-pressure washdowns.
- UL Recognized, CSA Certified, and USDA Approved.
- Insulation: Class F Max. ambient: 40 C Thermal protection: auto on PSC motors; none on capacitor-start Bearings: ball Rotation: CW/CCW Duty: continuous, except 1TRY8, 1TRY7, and 1TRY6