Average Rating: n/a
$480.41 + 3 Business Day Shipping $25.87
Specs
| Item | Washdown Motor |
|---|---|
| Motor Type | Capacitor-Start |
| Enclosure | Totally Enclosed Fan-Cooled |
| HP | 3/4 |
| Nameplate RPM | 1725 |
| NEMA/IEC Frame | 56C |
| Frame | 56C |
| NEMA Design | N |
| Rotation | CW/CCW |
| Voltage | 115/208-230 |
| Full Load Amps | 10.8/5.6-5.4 |
| Phase | 1 |
| Hz | 60 |
| Mounting | Face |
| Bearings | Ball |
| Frame Material | Epoxy Coated Steel |
| Thermal Protection | None |
| Service Factor | 1.15 |
| Max. Ambient Temp. | 40 Degrees C |
| Shaft Dia. | 5/8" |
| Shaft Length | 1-7/8" |
| Body Dia. | 6-1/2" |
| Length Less Shaft | 10-5/16" |
| Overall Length | 12-3/16" |
| Insulation Class | F |
| RPM Range | 1400-1800 |
| Duty | Continuous |
| Shaft Material | 303 Stainless Steel |
| Conduit Box | Cast Oversized Gasketed |
| Drain Plugs | (10) Total - (4) Each End and (2) In Conduit Box |
| Endshields | Epoxy Painted Aluminum |
| Nominal Efficiency | 70.0% |
| Standards | UL Recognized (E47479), CSA Certified (LR63596), USDA Approved |
| UNSPSC | 26101604 |
| Weight | 29.800000 |
| SKUs | 1TUR7 |
Description
Washdown Motor, Capacitor-Start, 3/4 HP, 1725 Nameplate RPM, Voltage 115/208-230, Phase 1, 56C Frame, Totally Enclosed Fan-Cooled, Full Load Amps 10.8/5.6-5.4, 60 Hz, Face Mounting, Thermal Protection None, F Insulation Class, Service Factor 1.15, Ball Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Rotation, Overall Length 12-3/16 In., Shaft Dia. 5/8 In., Shaft Length 1-7/8 In., Body Dia. 6-1/2 In., Length Less Shaft 10-5/16 In., Continuous Duty, Frame Material Epoxy Coated Steel
1-Phase Washdown Motors
- Built to comply with NEMA standard MG1-1.26.6 for washdown motors. 303 stainless steel shaft. V-ring rotating seal. Double-sealed, oversize bearings and spring-loaded contact seals in each endshield are lubricated with moisture-resistant grease. Conduit boxes have drains to shed excess moisture. White epoxy finish for superior resistance to caustic cleaning solutions. For high humidity/wet environments and areas where motor is occasionally exposed to high-pressure washdowns.
- UL Recognized, CSA Certified, and USDA Approved.
- Insulation: Class F Max. ambient: 40 C Thermal protection: auto on PSC motors; none on capacitor-start Bearings: ball Rotation: CW/CCW Duty: continuous, except 1TRY8, 1TRY7, and 1TRY6
