Average Rating: n/a
$255.67 + 3 Business Day Shipping $21.58
Specs
| Item | High Pressure Blower |
|---|---|
| Type | Less Motor |
| Wheel Dia. (In.) | 10-5/8 |
| CFM @ 1.000-In. SP | # |
| CFM @ 2.000-In. SP | # |
| CFM @ 3.000-In. SP | # |
| Max. Inlet Temp. (Deg. F) | 180 |
| Max. Ambient Temp. (F) | 104 |
| Height (In.) | 20-1/8 |
| Width (In.) | 15-5/8 |
| Depth (In.) | 14 |
| Inlet Dia. (In.) | 6 |
| Discharge Height (In.) | 4 |
| Discharge Width (In.) | 3-1/2 |
| Wheel Width (In.) | 3 |
| Wheel Bore (In.) | 5/8 |
| Housing Material | Steel |
| Housing Finish | Gray Polyester Epoxy |
| Wheel Material | Aluminum |
| Agency Compliance | AMCA AIR |
| UNSPSC | 40101601 |
| Weight | 23.200000 |
| SKUs | 4C108 |
Description
High Pressure Direct Drive Radial Blade Blower, Wheel Diameter 10 5/8 Inches, Wheel Bore 5/8 Inch, Inlet Diameter 6 Inches, Outlet Height 4 Inches, Outlet Width 3 1/2 Inches, Mounting Hole Diameter 3/8 Inch, Maximum Inlet Air Temperature 180 Degrees F, CW Rotation Viewed From Drive Side, Without Motor, Recommended Motor Power Rating 1 HP Or 1 1/2 HP @ 3450 RPM
Restrictions
- WARNING: Not intended for use where flammable or explosive gases, vapors, or dust are present. # Motor overload will result if blower is operated at static pressure below performance shown. Note: Review OSHA Codes. OSHA complying guards are required when fan blades are exposed and within reach of personnel. The A weighted sound ratings shown have been calculated per AMCA Standard 301. Values shown for blowers are for (inlet Lwi) sound levels for: Installation Type B: free inlet, ducted outlet. Ratings do not include the effects of duct end correction.
Radial Blade High-Pressure Direct-Drive Blowers
- Powerful blowers supply high-pressure air for efficient cooling and conveying. Paddle-type, self-cleaning, die-cast wheels rotate clockwise and are precision balanced for top performance. Bottom horizontal discharge. For proper installation, floor-mount vibration isolators (4C875) are recommended: order 4 vibration isolators for all except 4C330, and 6 vibration isolators for 4C330; see page 1628. Motor packed separately when ordered with blower. Great for small-ducted dust exhaust systems and wherever dust collection bags are necessary.
- Housing can be rotated to 8 discharge positions in each rotation Welded 16-ga. steel housings Gray baked-on epoxy finish Max. inlet air temp.: 180 F Max. ambient: 104 F
