Inline Duct Booster, 7 In. L, SleeveDB-2 48121
Average Rating: n/a
|Item||Inline Duct Booster|
|Housing Material||Galvanized Steel|
|Fits Duct Dia.||5 to 8"|
|Number of Speeds||1|
|CFM @ 0.000-In. SP||275|
|CFM @ 0.400-In. SP||220|
|CFM @ 0.450-In. SP||180|
|CFM @ 0.500-In. SP||100|
|Max. Inlet Temp.||200 Degrees F|
|Inlet and Outlet Dia.||5 to 8"|
|Motor Enclosure||Totally Enclosed|
- Note: cfm rating is for 8" dia. pipe. Air flow will decrease slightly with smaller pipe.
- Booster fits in round, square, or flat ducts as shallow as 3-1/4" deep. One 4" x 7" cutout is required. Unit attaches to ductwork with 4 sheet metal screws. May be actuated by 5C968 pressure switch. Steel housing and wheel. 1/70 HP, 1550 rpm, 115V, 60 Hz permanently lubricated motor is positioned out of the air stream.
- UL Listed.
- Max. operating air temp.: 200 F; not for use with combustion exhaust Motor shaft should remain horizontal to the floor; mount on bottom of horizontal or side of vertical duct