Average Rating: n/a
$1,620.66 + 3 Business Day Shipping $45.50
Specs
| Item | Pump |
|---|---|
| Type | Centrifugal |
| HP | 2 |
| Phase | 1 |
| Voltage | 115/230 |
| Amps | 16.6/8.3 |
| Inlet (In.) | 1-1/2 |
| Outlet (In.) | 1-1/4 |
| Motor Enclosure | TEFC |
| Housing Material | Stainless Steel |
| Impeller Type | Semi Open Non-Clogging |
| Impeller Material | Stainless Steel |
| Max. GPM @ Head (Ft.) | 122 @ 10 |
| Best Efficiency GPM @ Head (Ft.) | 70 @ 52 |
| Min. GPM @ Head (Ft.) | 10 @ 70 |
| Max. Head (Ft.) | 72 |
| GPM of Water @ 10 Ft. of Head | 122 |
| GPM of Water @ 15 Ft. of Head | 115 |
| Seal Type | Mechanical |
| Seal Material | Viton, Carbon, Ceramic, SS |
| Length (In.) | 14-13/16 |
| Width (In.) | 7-5/8 |
| Height (In.) | 7 |
| NEMA/IEC Frame | 56J |
| Motor RPM | 3450 |
| Hz | 60 |
| Service Factor | 1.2 |
| Wetted Materials | SS, Viton, Carbon, Ceramic |
| Volute Material | Stainless Steel |
| Shaft Material | Stainless Steel |
| Shaft Size (In.) | 5/8 |
| Screw Material | Stainless Steel |
| Seal Application | Long life When not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F) | 200 |
| GPM of Water @ 20 Ft. of Head | 109 |
| GPM of Water @ 25 Ft. of Head | 103 |
| GPM of Water @ 30 Ft. of Head | 98 |
| GPM of Water @ 40 Ft. of Head | 84 |
| GPM of Water @ 50 Ft. of Head | 68 |
| GPM of Water @ 60 Ft. of Head | 46 |
| GPM of Water @ 70 Ft. of Head | 10 |
| Best Efficiency Range GPM @ Head (Ft.) | 50-95 @ 65-30 Ft. |
| Max. Specific Gravity | 1.0 |
| Max. Case Pressure (PSI) | 200 |
| Max. Fluid Viscosity | 100 SSU |
| Inlet Pressure (PSI) | 218 |
| Bearing Type | Ball |
| Max. Pressure (PSI) | 31.2 |
| Duty | Continuous |
| Port Rotation | 4 Position |
| Drain Plug | Side and bottom |
| Manufacturers Warranty Length | 1 Year |
| Application | High Flow at Low Head Pressure |
| For Use With | Nonflammable and Nonabrasive Liquids |
| Includes | Manual |
| UNSPSC | 40151503 |
| Weight | 60.000000 |
| SKUs | 2ZWU8 |
Description
Pump, Centrifugal, 2 HP, 1 Phase, Voltage 115/230, 16.6/8.3 Amps, Inlet 1 1/2 In., Outlet 1 1/4 In., Motor Enclosure TEFC, Housing Material Stainless Steel, Impeller Type Semi Open Non-Clogging, Impeller Material Stainless Steel, Max. Head 72 Ft., Seal Type Mechanical, Length 14 13/16 In., Width 7 5/8 In., Height 7 In., 3450 Motor RPM, 60 Hz, Service Factor 1.2, Inlet Pressure 218 PSI
Stainless Steel
- Straight Centrifugal Pumps and Pedestal Pumps
- Housing Materials
- Stainless steel housing and impeller, with Viton , carbon, ceramic, and stainless steel mechanical seals.
- Pumps have continuous-duty motors for high-flow or high-head applications, and mechanical seals and side and bottom housing drain plugs. Designed for general transfer, boiler feed, condensate return, water circulation, irrigation, cooling towers, filtration, and pressure boosting. 1-phase motors are capacitor start and have internal thermal protection. 3-phase units do not have overload protection and require a pump control box, sold separately on page 4048. Pedestal pumps can be driven by pulley or directly coupled to a motor.
- 3450 rpm motors; NEMA 56J frames for closed coupled dumphead, 56 frame for rest Max. temp.: 200 F Max. viscosity: 100 SSU 4-position rotation
