Band Heater, 6 In. Dia., 120V, 900 Deg FMBH20546 489122
Average Rating: 5
|Material||Mica Insulated Steel|
|Max. Temp.||900 Degrees F|
|Termination||10 to 32 Screw Terminal|
|Watt Density||32 sq. in.|
|Width Tolerance||+/- 1/16"|
|Features||Built-in Low Thermal Expansion Strap|
- Note: Additional sizes are available on DrillSpot.com .
- Mica sheet insulates the heater windings. Nozzle models feature rust-resistant treated steel inner sheath casing. Barrel models feature 10-32 screw terminals, same side.
- Band Heaters
Average Product Rating: 5based on 1 reviews
just a gem....Wednesday, January 05, 2011
needed a defrost for my HRV this is a low wattage unit, and fit my app to a tee...got this along with a little Tempco line stat...clamped the heater over the duct joint right up next to the case, with the thermostat screwed to the case 2" above...great heat transfer, carries through the HRV case inside its now highly insulated exterior...only kicks on very rarely, and i'm getting 86% of the heat back when it does, and of course un-interrupted fresh air...sweet unit, made in Chicago....Thanks Drillspot, and Thanks Tempco!