Average Rating: n/a
$970.08 + 3 Business Day Shipping $65.65
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 1 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | CBR/CMC |
| Voltage | 230 |
| Phase | 1 |
| Amps | 11 |
| Height (In.) | 17 |
| Dia. (In.) | 14-1/4 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 3 |
| Max. Dia. Solids (In.) | 2 |
| GPM of Water @ 10 Ft. of Head | 160 |
| GPM of Water @ 15 Ft. of Head | 130 |
| GPM of Water @ 20 Ft. of Head | 100 |
| GPM of Water @ 25 Ft. of Head | 68 |
| GPM of Water @ 30 Ft. of Head | 40 |
| Max. Head (Ft.) | 35 |
| Max. Temp. (F) | 140 |
| RPM | 1625 |
| Thermal Protection | Automatic Reset |
| Motor Type | PSC, Oil-Filled |
| Bearing Type | Ball |
| Shaft Seal | Carbon/Ceramic |
| Standards | UL/CSA |
| Warranty | 2 yrs. |
| UNSPSC | 40151517 |
| Weight | 91.000000 |
| SKUs | 2EHN5 |
Description
Submersible Sewage Ejector Pump, 1 HP, Base Material Cast Iron, Housing Cast Iron, Top Material Cast Iron, Impeller Material Cast Iron, Phase 1, Voltage 230, 11 Amps, Height 17 In, Dia 14 1/4 In, Cord Length 20 Ft, Discharge NPT 3 In, Max Dia Solids 2 In, Max Head 35 Ft, Max Temp 140 F, Thermal Protection Automatic Reset, Standards UL/CSA
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Little Giant
- Max. liquid temp.: 140 F
