Average Rating: n/a
$1,222.01 + 3 Business Day Shipping $67.60
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 2 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Impeller Material | Brass |
| Shaft Material | CBR/CMC |
| Voltage | 230 |
| Phase | 3 |
| Amps | 12.6 |
| Height (In.) | 19 |
| Dia. (In.) | 13 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 3 |
| Max. Dia. Solids (In.) | 2 |
| GPM of Water @ 10 Ft. of Head | 205 |
| GPM of Water @ 15 Ft. of Head | 195 |
| GPM of Water @ 20 Ft. of Head | 168 |
| GPM of Water @ 25 Ft. of Head | 160 |
| GPM of Water @ 30 Ft. of Head | 140 |
| GPM of Water @ 40 Ft. of Head | 120 |
| GPM of Water @ 50 Ft. of Head | 87 |
| Max. Head (Ft.) | 77 |
| Max. Temp. (F) | 140 |
| RPM | 3100 |
| Thermal Protection | Automatic Reset |
| Motor Type | Oil Filled |
| Bearing Type | Ball |
| Shaft Seal | Carbon/Ceramic |
| Standards | UL/CSA |
| Warranty | 2 yrs. |
| UNSPSC | 40151517 |
| Weight | 94.000000 |
| SKUs | 2EHP1 |
Description
Submersible Sewage Ejector Pump, 2 HP, Base Material Cast Iron, Housing Cast Iron, Top Material Cast Iron, Impeller Material Brass, Phase 3, Voltage 230, 12.6 Amps, Height 19 In, Dia 13 In, Cord Length 20 Ft, Discharge NPT 3 In, Max Dia Solids 2 In, GPM of Water @ 50 Ft of Head 87, Max Head 77 Ft, Max Temp 140 F, Thermal Protection Automatic Reset, Standards UL/CSA
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Little Giant
- Max. liquid temp.: 140 F
