Average Rating: n/a
$623.07 + 3 Business Day Shipping $21.96
Specs
| Item | Effluent Pump, Submersible, High Head Filtered |
|---|---|
| Type | Manual Operation (Switch Not Included) |
| HP | 1/2 |
| Base Material | Stainless Steel |
| Housing | Stainless Steel |
| Top Material | Polypropylene |
| Mechanical Seal | CMC |
| Impeller Material | Celcon |
| Voltage | 115 |
| Amps | 10 |
| Height (In.) | 31 |
| Dia. (In.) | 4 |
| Cord Length (Ft.) | 10 |
| Discharge NPT (In.) | 1-1/4 F |
| Shaft Seal | Ceramic |
| GPM of Water @ 40 Ft. of Head | 31 |
| Max. Head (Ft.) | 115 |
| GPM of Water @ 25 Ft. of Head | 35 |
| GPM of Water @ 30 Ft. of Head | 33 |
| GPM of Water @ 50 Ft. of Head | 30 |
| GPM of Water @ 60 Ft. of Head | 28 |
| GPM of Water @ 70 Ft. of Head | 26 |
| GPM of Water @ 80 Ft. of Head | 23 |
| GPM of Water @ 90 Ft. of Head | 21 |
| GPM of Water @ 100 Ft. of Head | 20.5 |
| Max. Temp. (F) | 104 |
| Phase | 1 |
| RPM | 3450 |
| Thermal Protection | Auto Reset |
| Duty | Continuous |
| Motor Type | Split Phase |
| Bearing Type | Sleeve |
| Shaft Material | Stainless Steel |
| Standards | cCSAus |
| UNSPSC | 40151517 |
| Weight | 23.780000 |
| SKUs | 2EHP4 |
Description
Pump, High Head Filtered Effluent, Submersible, 1/2 HP, Housing Stainless Steel, Impeller Material Celcon, 115 Voltage, 10 Amps, Height 31 In., Dia. 4 In., Cord Length 10 Ft., Discharge NPT 1 1/4 F In., Max. Head 115 Ft., GPM of Water @ 50 Ft. of Head 30, Max. Temp. 104 F, Phase 1, Thermal Protection Auto Reset, Continuous Duty, Standards cCSAus
Restrictions
- Note: Continuous duty based on motor NEMA standards.
High-Head Filtered Effluent Pumps
- Pumps feature permanent split capacitor (PSC) motors with stainless steel shafts and hardware, long-life mechanical seals, and ball bearings. Floating stack design helps prevent problems with lockup, abrasives, and running dry. Little Giant models 2EHP2, 2EHP3, 2EHP4 have a removable built-in check valve. Ideal for use in wastewater removal and treatment, liquid transfer, circulation, dewatering, and flood control in commercial and industrial systems.
- Max. temp.: 104 F
