Pipe Insulation, Seam-Seal, 4 1/8 In, 6 Ft
Average Rating: 5
|Type||Pre-Slit, Pre Glued|
|Insulation Nominal I.D.||4-1/8"|
|Copper Tube Size (Nom. I.D. Plumbing)||4"|
|Copper Tube Size (O.D. HVAC/R)||4-1/8"|
|Iron Pipe Nominal Size||3-1/2"|
|Temp. Range||-160 to 200 Degrees F|
|Approx. ''R'' Factor||4.8|
|Material of Construction||Polyethylene|
|For Use On||Pipe|
|Agency Compliance||ASTM C 1427|
|Green Environmental Attribute||Product Contributes To Reducing Energy Consumption|
|Green Certification or Other Recognition||GREENGUARD Certified|
- Flexible Therma-Cel Polyolefin Pipe Insulation
- Preslit, self-sealing tubing has factory-applied adhesive and built-in release tabs. Can be pushed around P-traps and elbows up to and including 1" copper tube size. Mitering is recommended for complex joints.
- Help prevent heat gain and condensation or frost formation on water and air conditioning lines. Use with 320 or 620 contact adhesive or other approved sealing system.
- Meet ASTM C 1427.
- Temp. range: -160 to 200 F 6-ft. lengths
Average Product Rating: 5based on 1 reviews
wicked good serviceFriday, September 17, 2010
I checked all the listings for this product and found Drillspot to be the best in price. Free shipping, due in about 5 days, actually came in two. To my surprise, the boxe was shipped from Grainger, but the product was ordered through Drillspot. Great going guys. Used it to insulate my sewer pipe that is only 4 inches below ground due to ledge problems here in Maine. Last winter it froze, and my wife and I had to use the porta-potty for 3 weeks until it thawed. I was not going to go through that again!!!