Damper Motor Actuator, Replacement, ZD
Average Rating: 4.8
|Item||Damper Motor Actuator|
|For Use With||ZD Damper|
|Used With||ARD, ERD, and ZD dampers|
|Size (in.)||4 1/2 in. high x 2 3/8 in. wide x 3 3/8 in. deep|
|Motor or Actuator Mounting||Direct connection to damper shaft|
|Motor Timing||30 seconds powered/10 seconds spring return|
|Wires to Motor||2|
|Other Motor Information||Range stops|
Average Product Rating: 4.8based on 18 reviews
Damper Motor RepairMonday, June 24, 2013
Looks like whoever designed this damper did so with deliberate failure (and replacement) in mind. More money for the company, the distributors and the repair folks. Sound familiar? After several years of use, the nylon gear will strip. It can be repaired (one time) by carefully taking the motor apart and 'flipping' the gear to the 180 degree setting. Some tabs have to be bent and then re-bent, but the job should take about 30 minutes and give you another 'n' years of life. What would be really nice if these jokers would sell just the nylon gear. Shame on them!
when it works, it works.
more reliable nylon gear.
Just what I neededTuesday, February 12, 2013
I received this in the mail earlier than had been promised. It came with instructions for installatin which were excellent. The whole process took 15 minutes and it operates perfectly. Very pleased.
Ease of installation
reviewTuesday, January 29, 2013
excellentTuesday, January 29, 2013
The part worked fine and was easy to install. I save a lot of money by replacing it myself.
damper motorTuesday, January 22, 2013
The product arrived in a timely manner and was just what I ordered. I was very pleased.
worked like it was supposed to.
Great resourceSaturday, January 19, 2013
I was told by my local plumbing store that I would have to order the entire damper unit. I was thrilled that you had the linkage & motor in stock! The part was delivered on schedule to my doorstep! I will be sure to look to drillspot first in the future THANKS
Easy to install & was back in service in 5 minutes.
Great service and price.Thursday, January 17, 2013
I recently bought a "Cadillac" service plan for my FHA system. Naturally, dampers weren't covered .... . Oh well, got a quote, $349. Took the number off the unit, went to this site, had the part in a few days. Installed the new part in maybe 60 seconds, saved almost $300. Thank you very much.
Ease of install.
Quick deliver. Item as advertised!Tuesday, November 20, 2012
Worked as advertised.. I'm no handy man and this took me 5 minutes to install.. Saved me 300 dollars by doing it myself.. U just need an Alan or "hex" wrench to unscrew the black bar on the mounted unit.. After that the installation process takes minutes!
Easy to install and delivered quickly
So far so good works as promised and its been a week!
Great replacement for HON damper actuatorTuesday, September 18, 2012
Worked first time, no modifications required
Damper MotorTuesday, July 24, 2012
The product was a direct replacement part, was advertised correctly, was delivered on time with no issues.
PerfectFriday, July 13, 2012
Thanks. Best price and perfect OEM match.
AC PartThursday, June 21, 2012
Works like new!
Just what the system required
Quick, Easy, and Saved Lots of MoneyTuesday, June 05, 2012
Read reviews online and most of them were positive and stated that it was a fairly simple fix. Took a chance and bought two, because both damper motors were bad. It took me about 45 minutes, but should have only been about 30 min because I ran into a broken wire that I had to repair. I hope these new updated motors last longer then the first ones. An A/C company quoted me $1200.00 to replace the entire unit including the damper housing. What a rip off that would have been! All that needed to be replaced was the damper motors. Online it cost me $135.00 delivered. Go ahead and take the chance to fix it yourself. Do it in spring or fall when the attic is cooler.
Easy Fix to Furnace Duct SystemTuesday, March 13, 2012
Easy to install. Drillspot is great - fast delivery, good website, decent pricing.
Simple to swap in new unit
Two prior ones (initial install and one replacement) failed. Get a clicking noise - the plastic gear evidently strips after a few years of usage. This is a replacement SKU for the first two, so maybe it will last longer.
Easy TaskTuesday, January 31, 2012
Great product at great price. It took about 5 minutes to install and best of all, I saved over $300 by doing it myself.
Was easy to install
Great PriceMonday, January 30, 2012
I checked this at a local HVAC contractor and they wanted double the price. Took the chance on Drillspot and it worked out great.
Honeywell M847D1012Monday, April 18, 2011
This is a replacement damper an earlier Honeywell M847D damper for a Honeywell zone heating system. The old one had stripped gears and made a clicking noise while not operating fully. This is a direct replacement and was easy to install. It's only been in service a month, but appears to work fine. I ordered from Drillspot as the feedback seemed mostly positive. The package arrived in less time than quoted.
Damper Was Just What Was NeededFriday, December 31, 2010
The damper motor was the perfect replacement part for the broken motor that I needed to replace.