Average Rating: 5
$27.12
+ 3 Business Day Shipping $7.18
Specs
| Item | Pressure Switch |
|---|---|
| Type | Water Pump |
| Action | Standard |
| Factory On/Off Setting (PSI) | 60 to 80 |
| Pressure Range (PSI) | 10 to 80 |
| Differential | Adjustable |
| Differential Pressure (PSI) | 15 to 30 |
| Burst Pressure (PSI) | 220 |
| Number of Ports | 1 |
| Port Type | 1-Port 1/4" NPS (Female) |
| Actuation Type | Diaphragm |
| Phase | Single/Three |
| Contact Type | DPST |
| Amps | 10 |
| HP @ 1 Phase - 120V | 1-1/2 |
| HP @ 1 Phase - 230V | 2 |
| HP @ 3 Phase - 230V | 3 |
| HP @ 3 Phase - 460V | 1 |
| Enclosure | NEMA 1 |
| Temp. Range (F) | -22 to 257 |
| Standards | UL/CSA |
| Series | 9013FSG |
| UNSPSC | 39121506 |
| Weight | 1.050000 |
| SKUs | 2PXY8 |
Description
Pressure Switch, Water Pump, Standard Action, Factory On/Off Setting (PSI) 60 to 80, Pressure Range (PSI) 10 to 80, Adjustable Differential, Differential Pressure (PSI) 15 to 30, Burst Pressure (PSI) 220, 1, Port Type 1-Port 1/4 In. NPS (Female), - Unloader, Diaphragm Actuation Type, Manual Switch Action -, Single/Three Phase, DPST Contact Type, 10 Amps, Overload Protection (Amps) -, 1-1/2, 2, 3, 1, NEMA 1 Enclosure, Temp. Range (F) -22 to 257, Special Features -, Standards UL/CSA, 9013FSG
Pumptrol Water Pump Pressure Switches
- Designed for direct control of electrically driven pumps. Can be used with motor starters to control higher horsepower motors. Temp. range: -22 to 257 F.
- UL Listed and CSA Certified. NSF 61 Annex G and NSF 372 Certifications. NSF 372 on 9013G NSF 61 Annex G on 9013FSG.
- 1
- and 2-pole, HP Rated 1/4" female connection Diaphragm actuated Standard action contacts open on rising pressure Reverse action contacts open on falling pressure NEMA 1 enclosure
Customer Reviews
Pressure Switch Review
Tuesday, September 25, 2012The pressure switch was what I needed and installation was easy. It performed as it should, it kicked off at 80 psi and cut back in at 60 psi as it should.
The pressure I needed for the job.
I am having trouble adjusting the cut in pressure to a higher psi to get the tankless hot water heater to work properly with continuous hot water pressure, but I have not been successful. I'm still trying.
Just as Described
Tuesday, January 31, 2012Unit works fine out of the box. Just as described.
Submitted by Shrubery
