Needle Scaler, 1-17/32 In., 15.5 CFM
Average Rating: n/a
|Item||Needle Scaler Kit|
|Blows per Minute||4400|
|Average CFM @ 15 Second Run Time||3.88|
|CFM @ Full Load||15.5|
|Required Pressure||90 psi|
|Air Inlet||1/4" NPT|
|Min. Hose Size||3/8"|
|For Use With||"B1/CLECO" Design Chisels|
|Includes||3AAH7 Needle Scaler, (19) Needles, Flat Chisel, Moil Point Chisel, Angle Chisel and Case|
- Needle Scalers, Chisel Scalers, and Kits
- Includes Needle Scaler 3AAH7, 19 needles, flat chisel, moil point chisel, angle chisel, and case.
- Needle scalers are great for removing rust, paint, dirt, and weld on metal surfaces, even in tight spaces, corners, or curved surfaces. All models use a lever throttle except 3AAH8, which has a push-button throttle. Chisel scalers have 1/2" square shank. See page 3915 for replacement chisels.