Spade Drill Coolant Gland, Series 0290-1075A 507619
Average Rating: n/a
|Item||Spade Drill Coolant Gland|
|Blade Range (In.)||0.509 to 0.690|
|For Use With||Nos. 2XYY1 to 2XYY3|
|Application||Provides Through Coolant Capability If Spindle Cooling Is Unavailable, Use On R-8 Bridgeport Holders Only|
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer.
- For use in most alloy, carbon, free-machining, stainless, and tool steels, aluminum, gray cast iron, and high-temperature alloys. Accommodates a range of blade sizes with just a few holders compared to inventories required for indexable drills and steel taper shank drills. All holders are manufactured with both the option of through-the-spindle cooling or with a rotary coolant gland. Flood coolant is not recommended, but can be used for very short hole depths, less than 1" dia. Through coolant must be used with spade drill depths greater than 1" dia. 2XYY1, 2XYY2, 2XYY3 are used in Bridgeport machines that require a R-8 taper holder.
- Straight flute recommended for horizontal machining center applications Spiral flute recommended for vertical machining center applications