Pilot Burner Tubing
Average Rating: 4
|Type||Cut to Length|
|Special Information||1/4" Diameter Aluminum|
|Includes||Compression Nut, Ball Sleeves And Breakaway Ferrule|
Replacement Thermocouples, Pilot Assemblies, and Hot Surface IgnitorsItems are LP/NG except where noted. 5AU59 is 1/4"-dia. aluminum tubing; includes compression nut, ball sleeves, and breakaway ferrule. 2E446 has 36" armored cable leads with split-spade terminals. Includes mounting nut, spring clips, and PG9 adapter sleeve. 2EWF9 and 2EWF8 have low-mass, quick-dropout thermocouples.
Average Product Rating: 4based on 1 reviews
Furnace RepairedTuesday, October 30, 2012
The intermittent pilot circuitry for our furnace needed replacement. It was replaced with current technology single unit controller. The new gas valve has a pilot line port on the top while the former gas valve had the port on the side which made a new pilot line tube a necessity. The Robertshaw 11-293 was just what was needed.
Tubing was easily formed into the configuration needed without kinking.
One each of the brass fittings were supplied. Two each of the same fittings would make it more universal. I needed to re-use one of the old fittings to connect to the pilot orifice.