Average Rating: n/a
$990.00
+ 3 Business Day Shipping $40.95
Specs
| Item | Exhaust Ventilator |
|---|---|
| Type | Centrifugal Direct Drive Downblast |
| Wheel Dia. (In.) | 13-3/4 |
| CFM @ 0.000-In. SP | 2448 |
| CFM @ 0.125-In. SP | 2393 |
| CFM @ 0.250-In. SP | 2338 |
| CFM @ 0.375-In. SP | 2281 |
| CFM @ 0.500-In. SP | 2220 |
| CFM @ 0.625-In. SP | 2159 |
| CFM @ 0.750-In. SP | 2089 |
| CFM @ 0.875-In. SP | 2018 |
| CFM @ 1.000-In. SP | 1935 |
| CFM @ 1.250-In. SP | 1746 |
| CFM @ 1.500-In. SP | 1474 |
| Sones @ 0.125-In. SP @ 5 Ft. | 17.0 |
| Sones @ 0.250-In. SP @ 5 Ft. | 16.7 |
| Motor Voltage | 115/230 |
| Phase | 1 |
| Hz | 60 |
| Max. Operating Amps | 6.0/3.0 |
| Motor HP | 1/2 |
| Max. BHP | 0.60 |
| RPM | 1725 |
| Base Width (In.) | 22 |
| Base Length (In.) | 22 |
| Base Height (In.) | 1-3/4 |
| Overall Dia. (In.) | 28-3/8 |
| Overall Height (In.) | 23-3/4 |
| Shaft Dia. Wheel End (In.) | 1/2 |
| Mounting Location | Roof |
| Max. Inlet Temp. (Deg. F) | 130 |
| Housing Material | Spun Aluminum |
| Wheel Material | Aluminum |
| Wheel Type | Backward Incline |
| Speed Control | 1DGV3 |
| Speed Controllable | Yes |
| Agency Compliance | UL/cUL 705 |
| Requires | Curb For New Installations |
| Includes | NEMA 1 Junction Box |
| Adj. 12 3/8"H Roof Curb Stock No. | 2ZV82 |
| Adj. 6 3/8"H Roof Curb Stock No. | 4C453 |
| Recommended 12 In. Fixed Curb Item No. | 2RB76 |
| Recommended 8 In. Fixed Curb Item No. | 4HX39 |
| Recommended Damper Size (In.) | 15 x 15 |
| Recommended Damper Stock No. | 4HX65 |
| UNSPSC | 40101502 |
| Weight | 53.000000 |
| SKUs | 4YC71 |
Description
Centrifugal Exhaust Ventilator, Direct Drive Downblast, CFM @ 0.000-In SP 2448, @ 0.250-In SP 2338, 16.7 Sones @ 0.250-In SP, Roof Mounting Location, Base Width 22 In, Base Length 22 In, Max Inlet Temp 130 F, Motor Voltage 115/230, 1 Phase, Motor 1/2 HP, Wheel Dia 13 3/4 In, Housing Material Spun Aluminum, Speed Controllable, General Purpose Application, Includes NEMA 1 Junction Box
Restrictions
- Note: 8" models cannot be used with dampers or shutters.
Centrifugal Direct-Drive Downblast Exhaust Ventilators
- For use in general clean air environments Aluminum backward-inclined, nonoverloading centrifugal wheel design Fully rolled windband bead for increased stability Motor compartment is isolated from the air stream and is cooled by outside air NEMA 1 junction box located in motor enclosure Max. inlet air temp.: 130 F UL-705 Listed for Power Ventilators
- 1-Speed
- Ventilators have single-speed motors which are fully speed controllable at 115V and feature Class B insulation.
