Average Rating: n/a
$341.30 + 3 Business Day Shipping $18.85
Specs
| Item | Exhaust Ventilator |
|---|---|
| Type | Centrifugal, Direct Drive Downblast, 3 Speed |
| Wheel Dia. (In.) | 8-1/4 |
| CFM @ 0.000-In. SP | 253/314/374 |
| CFM @ 0.125-In. SP | 179/257/327 |
| CFM @ 0.250-In. SP | -/171/274 |
| CFM @ 0.375-In. SP | -/-/190 |
| Sones @ 0.125-In. SP @ 5 Ft. | 5.2/3.3/1.5 |
| Sones @ 0.250-In. SP @ 5 Ft. | -/2.6/4.7 |
| Motor Voltage | 115 |
| Phase | 1 |
| Hz | 60 |
| Max. Operating Amps | 0.68/0.77/1 |
| Motor HP | 1/30 |
| Max. BHP | 0.03 |
| RPM | 1050/1300/1550 |
| Base Width (In.) | 19 |
| Base Length (In.) | 19 |
| Base Height (In.) | 1-3/4 |
| Overall Dia. (In.) | 19-3/8 |
| Overall Height (In.) | 13-7/8 |
| Shaft Dia. Wheel End (In.) | 5/16 |
| Mounting Location | Roof |
| Max. Inlet Temp. (Deg. F) | 130 |
| Housing Material | Spun Aluminum |
| Wheel Material | Aluminum |
| Wheel Type | Backward Incline |
| Speed Control | 1DGV1 |
| Speed Controllable | Yes |
| Agency Compliance | UL/cUL 705 |
| Requires | Roof Curb For New Installations |
| Includes | NEMA 1 Junction Box |
| Adj. 12 3/8"H Roof Curb Stock No. | 2ZV82 |
| Adj. 6 3/8"H Roof Curb Stock No. | 4C453 |
| Recommended 12 In. Fixed Curb Item No. | 2RB75 |
| Recommended 8 In. Fixed Curb Item No. | 4HX38 |
| UNSPSC | 40101502 |
| Weight | 19.000000 |
| SKUs | 4YC64 |
Description
Exhaust Ventilator, Centrifugal, Direct Drive Downblast, 3 Speed, Wheel Dia 8 1/4 In, CFM @ 0.000-In SP 253/314/374, @ 0.250-In SP /171/274, /2.6/4.7 Sones @ 0.250-In SP, Motor Voltage 115, 1 Phase, Motor 1/30 HP, Base Width 19 In, Base Length 19 In, Roof Mounting Location, Max Inlet Temp 130 Deg F, Housing Material Spun Aluminum, Speed Controllable, Includes NEMA 1 Junction Box
Restrictions
- Note: 8" models cannot be used with dampers or shutters.
Centrifugal Direct-Drive Downblast Exhaust Ventilators
- 3-Speed
- Ventilators feature 3 specific RPM motors and are fully controllable on any selected speed. Speed control allows for 30% useable turndown.
- For use in general clean air environments Aluminum backward-inclined, nonoverloading centrifugal wheel design Fully rolled windband bead for increased stability Motor compartment is isolated from the air stream and is cooled by outside air NEMA 1 junction box located in motor enclosure Max. inlet air temp.: 130 F UL-705 Listed for Power Ventilators
