Propeller, 14 In Dia, 27 Deg Pitch
Average Rating: 5
|Item||Replacement Propeller, Hubless|
|Propeller Dia. (In.)||14|
|CFM @ 0.000-In. SP||1822|
|CFM @ 0.300-In. SP||1568|
|Number of Blades||4|
|For Use With||Air Conditioning Condensers, Heat Pumps, Heat Exchangers and Unit Heaters|
|Requires||Interchangeable Hex Hub 2A563 or 2A564 or 2A565|
- For use with A/C condensers, heat pumps, heat exchangers, unit heaters, and power roof ventilators. OEM replacements for the aftermarket. For replacement condenser fan motors, see pages 70, 72, and 63.
- Rotation facing discharge Embossed aluminum blades and spiders for strength and rigidity Hub-type propellers have 1/2" bore and include set screws (hub on intake side) Hubless propellers require interchangeable hex hubs (sold separately, this page) For low static pressure applications
Average Product Rating: 5based on 1 reviews
Great ProductTuesday, September 13, 2011
I purchased this product to replace the fan blade that came with my attic ventilator which was getting louder with time due to increased vibration in the blade assembly. This new fan blade is far better constructed with ribs pressed into the blades to increase rigidity and reduce noise. The new fan blades are not only much quieter but they move a greater volume of air which pleases me greatly. Because of this, the fan works less and uses less energy. Drillspot is a pleasure to deal with, always shipping quickly. I used this fan blade with the AO Smith Blower Motor, 1/3hp, model 1036 I purchased previously from Drillspot. All the parts were shipped from Grainger who refused to sell me the parts directly and the best part is - Drillspot sold them to me for less!!