Gas Unit Heater, Gas Type NG/LP, Fan Type Propeller, 30, 000 BtuH Input, 24, 300 BtuH Output, Air Flow 370 cfm, 3.0 Full Load Amps, Gas Connection 1/2 In., Flue Dia. 4 In.Height 12-3/8 In., Width 30 In., Depth 25-7/8 In., Indoor Air Discharge Height 12-3/8 In., Indoor Air Discharge Width 30 In., Voltage 120, 60 Hz, Air Temp. Rise 60 Degrees F, Installation Height 8 ft., Ignition System Direct SparkPrimary Heat Exchanger Material 20 ga. Aluminized Steel, Drive Type Direct
- Note: For altitudes above 2000 ft., consult owner's manual prior to installation for proper adjustments.
Gas-Fired Low-Profile Unit Heaters
- Multitapped rails allow multiple O.C. distances. ETL Certified in accordance with both Categories I and III venting requirements. Approved for installation in residential garage, commercial, and industrial applications. 24V thermostat required (not included); see page 4568.
- 120V NG (LP conversion kit included) Direct spark ignition system Field-convertible for separated combustion application with approved vent kit Power venting allows horizontal venting through side walls Tubular heat exchanger and single burner design