Average Rating: n/a
$300.12
+ This item ships directly from the manufacturer within 10 business days. Please allow additional time for delivery.
Specs
| Item | Spade Drill Holder |
|---|---|
| Type | Coolant Fed |
| Grade | Heavy Duty |
| Series | 2 |
| Flute | Spiral |
| Shank | R-8 Bridgeport |
| Blade Range (In.) | 0.961 to 1.380 |
| Max. Drill Depth (In.) | 3.32 |
| Body Length (In.) | 5.19 |
| Overall Length (In.) | 9.19 |
| Shank Length (In.) | 4 |
| Morse Taper | R8 (16 Deg 50 Ft) |
| For Use With | 1/16-27 Pipe Taps |
| Application | For Vertical Machining Center Applications On Alloy, Carbon, Free Machining, Stainless And Tool Steels, Aluminum, Gray Cast Iron And High Temperature Alloys |
| Dimension A (In.) | 3.32 |
| Dimension C (In.) | 5.19 |
| Dimension D (In.) | 9.19 |
| Dimension L (In.) | 4 |
| UNSPSC | 27112801 |
| Weight | 1.700000 |
| SKUs | 2XYY3 |
Description
Spade Drill Holder, Coolant Fed, Heavy Duty Grade, Series 2, Spiral Flute, R-8 Bridgeport Shank, Blade Range 0.961 To 1.380 In, Max Drill Depth 3.32 In, Body Length 5.19 In, Overall Length 9.19 In, Shank Length 4 In, R8 (16 Deg 50 Ft) Morse Taper, For Use With 1/16-27 Pipe Taps, For Vertical Machining Center Applications On Alloy, Carbon, Free Machining, Stainless And Tool Steels, Aluminum, Gray Cast Iron And High Temperature Alloys
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer.
Coolant-Fed Spade Drill Holders and Coolant Glands
- For use in most alloy, carbon, free-machining, stainless, and tool steels, aluminum, gray cast iron, and high-temperature alloys. Accommodates a range of blade sizes with just a few holders compared to inventories required for indexable drills and steel taper shank drills. All holders are manufactured with both the option of through-the-spindle cooling or with a rotary coolant gland. Flood coolant is not recommended, but can be used for very short hole depths, less than 1" dia. Through coolant must be used with spade drill depths greater than 1" dia. 2XYY1, 2XYY2, 2XYY3 are used in Bridgeport machines that require a R-8 taper holder.
- Straight flute recommended for horizontal machining center applications Spiral flute recommended for vertical machining center applications
