Pump, Sump, 1/2 HP
Average Rating: n/a
|Item||Submersible Sump Pump, High Temperature|
|Discharge NPT (In.)||1-1/2|
|Cord Length (Ft.)||15|
|On Point (In.)||12|
|Off Point (In.)||3|
|GPM of Water @ 5 Ft. of Head||66|
|GPM of Water @ 10 Ft. of Head||56|
|GPM of Water @ 15 Ft. of Head||41|
|GPM of Water @ 20 Ft. of Head||23|
|Max. Head (Ft.)||22|
|Max. Dia. Solids (In.)||1/2|
|Max. Temp. (F)||200|
|Base Material||Cast Iron|
|Top Material||Cast Iron|
- Note: Basin material must be designed for the elevated temps. anticipated. Note: Continuous-duty based on motor NEMA standards. Note: For high-temp. check valves, see page 4107.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
- Use in boiler blow-down pits, plant washdown sump pits, public utility underground transformer vaults, and industrial cleaning sump pits.
- All wetted components are high-temp. rated, as are the motor windings. 5CZG0 is for intermittent use only. 4P023 features Viton gaskets and conduit; conduit length from pump to switch is 3 ft. Float-operated mechanical switch box is mounted on the discharge pipe above the operating level.