Average Rating: n/a
$1,068.54
+ 3 Business Day Shipping $61.10
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 1 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | CBR/CMC |
| Voltage | 230 |
| Phase | 1 |
| Amps | 8.9 |
| Height (In.) | 20-11/16 |
| Dia. (In.) | 13-9/16 |
| Cord Length (Ft.) | 15 |
| Discharge NPT (In.) | 2 |
| Max. Dia. Solids (In.) | 2 |
| GPM of Water @ 5 Ft. of Head | 170 |
| GPM of Water @ 10 Ft. of Head | 158 |
| GPM of Water @ 15 Ft. of Head | 133 |
| GPM of Water @ 20 Ft. of Head | 106 |
| GPM of Water @ 25 Ft. of Head | 72 |
| GPM of Water @ 30 Ft. of Head | 43 |
| Max. Head (Ft.) | 35 |
| Max. Temp. (F) | 130 |
| RPM | 1750 |
| Thermal Protection | Automatic Reset |
| Motor Type | Hermetically-sealed, Oil-filled |
| Shaft Seal | Carbon/Ceramic |
| Warranty | 1 yr. |
| UNSPSC | 40151517 |
| Weight | 84.000000 |
| SKUs | 4NW31 |
Description
Submersible Sewage Pump, Power Rating 1 HP, Voltage @ 60 Hz 230 Volts, Phase Single, Speed 1750 RPM, Current Rating 8.9 Amps, Discharge NPT 2 Inches, Cord Length 15 Feet, Impeller Cast Iron, Shut Off 35 Feet, Water Flow @ 15 Feet of Head 135 GPM, Water Flow @ 20 Feet of Head 106 GPM, Water Flow @ 25 Feet of Head 76 GPM, Water Flow @ 30 Feet of Head 43 GPM, Water Flow @ 5 Feet of Head 180 GPM
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Zoeller
- For replacement parts, see page 4044.
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. liquid temp.: 130 F
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
