Average Rating: n/a
$443.29 + 3 Business Day Shipping $26.75
Specs
| Item | Oil Coolant Pump |
|---|---|
| Type | Suction |
| HP | 1/4 |
| Phase | 1 |
| Amps | 3/1.5 |
| Voltage | 115/230 |
| Length (In.) | 7-3/8 |
| Width (In.) | 7-3/8 |
| Height (In.) | 9 |
| Discharge Port (In.) | 3/4 |
| Bolt Circle Dia. (In.) | 7.25 |
| Inlet/Outlet (In.) | 3/4 |
| RPM | 3450 |
| Motor Enclosure | TENV |
| GPM of Water @ 5 Ft. of Head | 20 |
| GPM of Water @ 10 Ft. of Head | 20 |
| GPM of Water @ 15 Ft. of Head | 17 |
| GPM of Water @ 20 Ft. of Head | 14 |
| GPM of Water @ 30 Ft. of Head | 5 |
| Shut-Off (Ft.) | 32 |
| Impeller Material | Plastic |
| Body Material | Cast Iron |
| Max. Recommended Viscosity | 500 SSU |
| Max. Suction Lift (Ft.) | 2 |
| Max. Temp. | 180 |
| Shaft Material | Carbon Steel |
| Shaft Seal | Carbon |
| Elastomer | Viton |
| Application | Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Including Grinders |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| UNSPSC | 40151504 |
| Weight | 31.150000 |
| SKUs | 3GRU8 |
Description
Oil Coolant Pump, Suction, HP 1/4, Phase 1, Amps 3/1.5, Voltage 115/230, Length 7 3/8 In., Width 7 3/8 In., Height 9 In., Inlet/Outlet 3/4 In., RPM 3450, Motor Enclosure TENV, GPM of Water @ 5 Ft. of Head 20, 32, Max. Recommended Viscosity 500 SSU, Max. Suction Lift 2 Ft., Max. Temp. 180
Coolant Pumps
- Suction
- Dayton
- Mount above liquid level in all locations. Feature mechanical seals with carbon/ceramic shaft seal, Buna N elastomers, and steel springs. Use with all types of machines, except grinders.
- Pumps circulate coolant and spray cutting oil. For replacement filters, see page 4108.
- Max. fluid temp.: 180 F Max. viscosity: 500 SSU Max. suction lift: 2 ft.
- 3450 rpm motors Cast-iron bodies and volutes
