Average Rating: n/a
$430.75 + 3 Business Day Shipping $11.93
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| HP | 1/8 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 1.4 |
| Inlet/Outlet | Flanged |
| Housing Material | Stainless Steel |
| Face to Face Dimension (In.) | 6-3/8 |
| Max. Temp. (F) | 230 |
| Max. Working Pressure (PSI) | 125 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 35 |
| RPM | 3250 |
| Impeller Material | Noryl(R) |
| Shaft Material | Ceramic |
| Thermal Protection | Impedance |
| GPM of Water @ 1 Ft. of Head | 10.5 |
| GPM of Water @ 2 Ft. of Head | 10 |
| GPM of Water @ 3 Ft. of Head | 9.75 |
| GPM of Water @ 4 Ft. of Head | 9.5 |
| GPM of Water @ 5 Ft. of Head | 9.25 |
| GPM of Water @ 6 Ft. of Head | 9 |
| GPM of Water @ 7 Ft. of Head | 9 |
| GPM of Water @ 8 Ft. of Head | 8.75 |
| GPM of Water @ 9 Ft. of Head | 8.5 |
| GPM of Water @ 10 Ft. of Head | 8.25 |
| GPM of Water @ 11 Ft. of Head | 8.25 |
| GPM of Water @ 12 Ft. of Head | 8 |
| GPM of Water @ 13 Ft. of Head | 7.75 |
| GPM of Water @ 15 Ft. of Head | 7.5 |
| GPM of Water @ 18 Ft. of Head | 6.75 |
| GPM of Water @ 20 Ft. of Head | 6 |
| GPM of Water @ 25 Ft. of Head | 5 |
| GPM of Water @ 30 Ft. of Head | 3 |
| Length (In.) | 7 |
| Width (In.) | 4-1/8 |
| Feet of Head @ 3 GPM | 30 |
| Feet of Head @ 4 GPM | 28 |
| Feet of Head @ 5 GPM | 24 |
| Max. GPM @ Head (Ft.) | 10.5 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 6 @ 20 |
| Feet of Head @ 6 GPM | 20 |
| Feet of Head @ 7 GPM | 16 |
| Min. GPM @ Head (Ft.) | 5 @ 25 |
| Feet of Head @ 8 GPM | 12 |
| Drive Type | Direct |
| Bearing Type | Sleeve/Carbon |
| Feet of Head @ 9 GPM | 8 |
| Feet of Head @ 10 GPM | 2 |
| Manufacturers Warranty Length | 3 years |
| Compliance | Certified For Use In Potable Water Applications in CA and VT |
| UNSPSC | 40151504 |
| Weight | 8.360000 |
| SKUs | 3GZW1 |
Description
Circulator Pump, Open Loop System, 1/8 HP, 1 Phase, Voltage 115, 1.4 Amps, Inlet/Outlet Flanged, Housing Material Stainless Steel, Max. Temp. 230 F, Max. Working Pressure 125 PSI, Shut-Off 35 Ft., 3250 RPM, Impeller Material Noryl, Impedance Thermal Protection
Hot Water Circulating Pumps
- Maintenance-free in-line pumps are made for hydronic heating, domestic hot water recirculation, solar thermal heating, and heat recovery systems. 2400 Series has a 1/2" carbon/silicon-carbide mechanical seal, permanently lubricated ball bearings with 1/2" stainless steel shaft. Wet rotor. 00 Series has a replaceable cartridge that contains all moving parts and the motor is impedance-protected.
- Stainless Steel
- 100% lead-free construction meets all ANSI/NSF-61 requirements for use in potable water systems. Meet NSF requirement for =0.25% lead content.
