Average Rating: n/a
$242.04 + 3 Business Day Shipping $10.59
Specs
| Item | Circulator Pump |
|---|---|
| Type | Open Loop |
| HP | 1/35 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 0.54 |
| Inlet/Outlet | Flanged |
| Housing Material | Stainless Steel |
| Face to Face Dimension (In.) | 6-3/8 |
| Max. Temp. (F) | 220 |
| Max. Working Pressure (PSI) | 125 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 8.5 |
| RPM | 3250 |
| Impeller Material | Noryl(R) |
| Shaft Material | Ceramic |
| Thermal Protection | Impedance |
| GPM of Water @ 1 Ft. of Head | 18.5 |
| GPM of Water @ 2 Ft. of Head | 16.5 |
| GPM of Water @ 3 Ft. of Head | 15 |
| GPM of Water @ 4 Ft. of Head | 13.25 |
| GPM of Water @ 5 Ft. of Head | 11.5 |
| GPM of Water @ 6 Ft. of Head | 9 |
| GPM of Water @ 7 Ft. of Head | 7 |
| GPM of Water @ 8 Ft. of Head | 3 |
| Length (In.) | 5-5/8 |
| Width (In.) | 4-3/4 |
| Feet of Head @ 3 GPM | 8 |
| Feet of Head @ 4 GPM | 7.75 |
| Feet of Head @ 5 GPM | 7.5 |
| Max. GPM @ Head (Ft.) | 18.5 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 11@7 |
| Feet of Head @ 6 GPM | 7.25 |
| Feet of Head @ 7 GPM | 7 |
| Min. GPM @ Head (Ft.) | 3 @ 8 |
| Feet of Head @ 8 GPM | 6.5 |
| Drive Type | Direct |
| Bearing Type | Sleeve/Carbon |
| Feet of Head @ 9 GPM | 6 |
| Feet of Head @ 10 GPM | 5.5 |
| Feet of Head @ 12 GPM | 5 |
| Feet of Head @ 15 GPM | 3 |
| Feet of Head @ 18 GPM | 1 |
| Manufacturers Warranty Length | 3 years |
| Compliance | Certified For Use In Potable Water Applications in CA and VT |
| UNSPSC | 40151504 |
| Weight | 6.290000 |
| SKUs | 3GZW2 |
Description
Circulator Pump, Open Loop System, 1/35 HP, 1 Phase, Voltage 115, 0.54 Amps, Inlet/Outlet Flanged, Housing Material Stainless Steel, Max. Temp. 220 F, Max. Working Pressure 125 PSI, Shut-Off 8.5 Ft., 3250 RPM, Impeller Material Noryl, Impedance Thermal Protection
Hot Water Circulating Pumps
- Maintenance-free in-line pumps are made for hydronic heating, domestic hot water recirculation, solar thermal heating, and heat recovery systems. 2400 Series has a 1/2" carbon/silicon-carbide mechanical seal, permanently lubricated ball bearings with 1/2" stainless steel shaft. Wet rotor. 00 Series has a replaceable cartridge that contains all moving parts and the motor is impedance-protected.
- Stainless Steel
- 100% lead-free construction meets all ANSI/NSF-61 requirements for use in potable water systems. Meet NSF requirement for =0.25% lead content.
