Average Rating: n/a
$2,794.40 + 3 Business Day Shipping $111.80
Specs
| Item | Engine Driven Semi-Trash Pump |
|---|---|
| Type | Trash Pump |
| HP | 5.5 |
| Engine Size | 160cc |
| Engine Brand | Honda |
| Engine/Motor Type | Gas |
| Tank Capacity (Qt.) | 0.8 |
| NPT Port (In.) | 2 |
| Length (In.) | 25 |
| Width (In.) | 20-13/32 |
| Height (In.) | 21-1/2 |
| Material of Construction | Ductile Iron |
| Impeller | Cast Iron |
| Impeller Type | Semi-Open |
| Seal Material | SG |
| Solids Handling Capacity (In.) | 1-1/8 |
| Max. Pressure (PSI) | 125 |
| Engine RPM | 3600 |
| GPM of Water @ 10 Ft. of Head | 200 |
| GPM of Water @ 30 Ft. of Head | 198 |
| GPM of Water @ 40 Ft. of Head | 194 |
| GPM of Water @ 50 Ft. of Head | 180 |
| GPM of Water @ 60 Ft. of Head | 145 |
| GPM of Water @ 70 Ft. of Head | 110 |
| GPM of Water @ 80 Ft. of Head | 75 |
| GPM of Water @ 90 Ft. of Head | 40 |
| Max. Head (Ft.) | 100 |
| Max. Suction Lift (Ft.) | 25 |
| Casing Adapter | Cast-Iron |
| Mechanical Seal | Siliconized Graphite |
| Check Valve | Buna |
| Roll Bar Frame | Steel |
| Number of Impellers | 1 |
| Temp. Range (F) | 200 |
| Ignition Type | Recoil |
| Fuel Type | Gasoline |
| Sensor Type | Low Oil |
| Self-Priming | Yes |
| Includes | Suction Strainer |
| UNSPSC | 40151503 |
| Weight | 162.000000 |
| SKUs | 4HGG6 |
Description
Engine Driven Semi-Trash Pump, 5.5 HP, Engine Brand Honda, Engine/Motor Type Gas, Tank Capacity 0.8 Qt., NPT Port 2 In., Length 25 In., Width 20 13/32 In., Height 21 1/2 In., Material of Construction Ductile Iron, Impeller Cast-Iron, Impeller Type Semi-Open, Solids Handling Capacity 1 1/8 In., Max. Pressure 125 PSI, Engine RPM 3600, GPM of Water @ 30 Ft. of Head 198, Max. Head 100 Ft., Max. Suction Lift 25 Ft., Includes Suction Strainer
Portable Engine-Driven Solids-Handling Pumps
- Provide fast, efficient liquid transfer and dewatering. Can be used in remote locations, above or below water level.
- Little Giant
- Self-priming pumps handle slurries of mud, sand, and silt, up to 10% by volume. 4HGG6, 4HGG7, and 4HGG8 have a removable-front housing, for access to impeller and volute. Hard, siliconized graphite seal faces stand up to abrasive material found in construction and drainage applications. Include stainless steel suction strainer. 4HGG2, 4HGG3, and 4HGG4 are electric start, designed for general purpose marine and industrial applications. Viton seal elastomer withstands high temperatures and most agricultural chemicals.
