Average Rating: n/a
$586.47 + 3 Business Day Shipping $9.36
Specs
| Item | Control,DC,Washdown / NEMA 4/12 |
|---|---|
| Shunt Wound Volts | 100 or 200 |
| HP | 1/8 to 2 |
| Voltage Output | 90 or 180 VDC |
| Input Voltage | 120/240 VAC |
| Enclosure | NEMA 4/12 |
| Speed Range | 50:1 |
| Speed Regulation | +/- 1 Percent of Motor Base Speed |
| Current/Torque Limit | Adjustable |
| Accepts Tach Feedback | Yes |
| Dynamic Braking | No |
| Linear Acceleration | Fixed |
| Linear Deceleration | No |
| Fixed Deceleration (Sec.) | 1/2 |
| Power On Light | Yes |
| Protection Type | Fused |
| IR Compensation | Adj. |
| Mount Type | Wall Mount |
| Height (In.) | 9.50 |
| Depth (In.) | 5.50 |
| Width (In.) | 5.00 |
| Operating Temp. | -10 to 40 Degrees C. Ambient (15 to 105 Degrees F.) |
| External Switches | On/Off |
| HP @ Higher Volts | 1/4 to 2 |
| HP @ Lower Volts | 1/8 to 1 |
| For Use With | For Packagg Equipment, Pumps, Fans, Blowers, Conveyors and Other Constant or Dimishg Torques |
| Includes | Run/Stop Switch, Built-in Transient and Surge Suppression |
| Agency Compliance | UL Pending |
| UNSPSC | 39121510 |
| Weight | 4.400000 |
| SKUs | 5X485 |
Description
Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking No, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00
Restrictions
- Note: Not intended for constant-HP applications such as saws and drill presses, or in close proximity to high-capacitive-discharge electrical circuits such as welding equipment.
Dayton
- Adjustable min./max. speed and IR compensation Speed regulation: 1%
- DC Adjustable-Speed Controls
- For permanent magnet or shunt-wound DC motors and gearmotors. Solid-state speed controls convert line voltage input to full-wave DC power on constant- or diminishing-torque applications. 4Z829 and 13A944 include isolated voltage/current follower input with an auto/manual switch.
- Built-in transient and surge suppression
