Average Rating: n/a
$121.53 + 3 Business Day Shipping $9.36
Specs
| Item | Elastomeric Tensioner |
|---|---|
| ANSI Chain Size | 40, 41, 50, 60 |
| Flat Belt Width (In.) | 2, 3, 4 |
| V-Belt Size Range | D, E |
| Mounting Hole (In.) | 1/2 |
| Mounting Hole (Metric) | M12 x 40 |
| Idler Bolt (In.) | 1/2-13 x 3-1/2 |
| Temp. Range (F) | -40 to 180 |
| Normal 10 Deg. Force (Lb.) | 33.8 |
| Hard 10 Degree Force (Lb.) | 43.8 |
| 10 Deg. Normal Dim. S (In.) | 0.87 |
| Hard 20 Degree Force (Lb.) | 111.1 |
| Normal 20 Deg. Force (Lb.) | 85.4 |
| 20 Degree Dim. S (In.) | 1.73 |
| Hard 30 Degree Force (Lb.) | 233.8 |
| Normal 30 Deg. Force (Lb.) | 179.8 |
| 30 Degree Dim. S (In.) | 2.56 |
| Tensioning Arm | Deflects Up to 30 Degrees Either Side of its Neutral Position Allowing a Pretension Force that Self-adjusts an Idler to Everyday Elongation of Chain or Belt while Dampening Vibration in the Drive |
| Insert | Four Rubber, Inside Base Isolate Tensioning Arm from Contact with Base and Provide Continuous Resistance |
| Function | Eliminates Slap and Vibration while Minimizing Drive, Bearing and Shaft Wear, Keep Chain and Belts Taut Preventing Uneven Drive Surges and Power Losses |
| Application | For Chain and Belt Tensioning, Pressing and Cushioning |
| Includes | Mounting Bolt and Idler Bolt, 5/8" Bushing |
| Dimension D (In.) | 3.07 |
| Dimension E (In.) | 4.25 |
| Dimension G (In.) | 0.32 |
| Dimension L (In.) | 6.10 |
| Dimension N (In.) | 2.05 |
| Dimension J1(In.) | 5.12 |
| Dimension J2 (In.) | 3.94 |
| Dimension K (In.) | 1.97 |
| Dimension T (In.) | 0.53 |
| UNSPSC | 26111533 |
| Weight | 4.400000 |
| SKUs | 1L835 |
Description
Elastomeric Chain/Belt Tensioner, ANSI Chain Size 40, 41, 50 and 60, Flat Belt Width 2, 3 and 4 Inches, V Belt Size Range D, E, Mounting Hole Size M12 x 40 Metric, Idler Bolt 1/2-13 x 3 1/2 Inches, Normal 10 Degrees Force 33.7 Pounds, Normal 20 Degrees Force 85.4 Pounds, Normal 30 Degrees Force 179.8 Pounds, Hard 10 Degrees Force 43.8 Pounds, Hard 20 Degrees Force 111.1 Pounds, Hard 30 Degrees Force 233.8 Pounds, 10 Degrees Normal Dimension S 0.87 Inch, 20 Degrees Normal Dimension S 1.73 Inches
Elastomeric Tensioners
- Employ no metal-to-metal connections; no lubrication required. Withstand dirt and grime; can be used indoors or out. Mounting bolt and idler bolt included. 1L833, 1L834, and 1L835 include 5/8" bushing. Idler sprockets not included; for compatible sprockets see page 170.
- 1-bolt mounting Temp. range: -40 to 180 F
