Solenoid Valve, Universal, 1/4 In, Brass
Average Rating: n/a
|Number of Ways||3|
|Cv Flow Factor||0.25|
|Pipe Size (In.)||1/4|
|Orifice Dia. (In.)||1/8|
|PSI Differential Min.||0|
|Coefficient of Volume||0.25|
|Max. Fluid Temp. (F)||200|
|Coil Insulation Class||F|
|Coil Enclosure||NEMA Type 7, 9|
|Construction Reference No.||2|
|Center Line Pipe Center Size (In.)||2-3/4|
|Agency Compliance||CSA and UL for General Purpose|
- Coil enclosures have a built-in 1/2" NPT conduit hub with strain relief. Designed to contain internal explosions without causing an external hazard for Type 7 Class 1, Division 1 and 2, Groups A, B, C, and D gases or vapors. Type 9 Class 2, Division 1 and 2, Groups E, F, and G. Normally closed valves close when de-energized. Normally open valves open when de-energized.
- Air is exhausted through the exhaust orifice to quickly shift control valves to 0 psi.
- Have 3 pipe connections and 2 orifices that alternately apply pressure to and exhaust pressure from a valve actuator or single-acting cylinder.