Average Rating: 5
$62.46 + 3 Business Day Shipping $8.09
Specs
| Item | AC Gearmotor |
|---|---|
| Type | Parallel Shaft |
| Voltage Rating | 115 |
| Phase | 1 |
| Hz | 60 |
| Shaft Orientation | Parallel |
| Nameplate RPM | 6.9 |
| Full Load Torque (In.-Lbs.) | 35.0 |
| Starting Torque (In.-Lb.) | 27 |
| Overhung Load (Lb.) | 3.5 |
| Input HP | 1/100 |
| Gear Ratio | 439:1 |
| Full Load Amps | 0.55 |
| Enclosure | Open |
| Thermal Protection | Impedance |
| Rotation | CW |
| Mounting | All Position |
| Motor Type | Shaded Pole |
| Length Less Shaft (In.) | 2-5/8 |
| Shaft Dimensions (In.) | 5/16 x 3/4 |
| Bearings | Porous Bronze Sleeve on Both Case and Motor |
| Lubrication | Grease Filled |
| Gear Case | Zinc Die Cast with Steel Cover |
| Gears | Delrin/Steel |
| RPM Range | 0 to 15 |
| UNSPSC | 26101602 |
| Weight | 2.450000 |
| SKUs | 3M096 |
Description
AC Gearmotor, Parallel Shaft, Voltage Rating 115, 1 Phase, 60 HzNameplate RPM 6.9, Full Load Torque (In.-Lbs.) 35.0, Overhung Load (Lb.) 3.5, Input HP 1/100, Gear Ratio 439:1, Full Load Amps 0.55Open Enclosure, Impedance Thermal Protection, All Position Mounting, Motor Type Shaded Pole
115 and 230VAC Shaded Pole Parallel Shaft Gearmotors
- Gearcase: die-cast zinc with steel cover Lubrication: grease-filled Gears: Delrin and steel Bearings: porous bronze sleeve on both case and motor Mounting: all-position Rotation: clockwise facing output shaft Thermal protection: impedance, for 115V 60-Hz models only All are CSA Certified. 115V 60-Hz models are UL Recognized
Customer Reviews
Lapidary Saw Replacement
Tuesday, March 20, 2012I needed this motor to replace an old one on my Lapidary Saw. Not only did I save over $12.00 by purchasing it from DrillSpot I also got FREE shipping giving me a combined savings of about $25.00
Exact replacement
It's as good as it gets
Paint Tinter Motor
Monday, December 06, 2010Hard to find item that saved me $1500 to buy a new paint tinter. Customer Service was outstanding! Thanks!
Submitted by Brian O
